Argo TABLO EVO Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo TABLO EVO. Argo TABLO EVO 10 pagina's.

 The most common cause of overheating is the build-up of dust in the

appliance. Remove dust deposits by unplugging the appliance and

cleaning the air outlets and grilles with the aid of a vacuum cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean

the appliance with the aid of a damp (not wet) cloth rinsed in hot

soapy water. Always remove the plug from the mains socket before

cleaning.

 To disconnect the fan, push the switch to OFF and remove the plug

from the socket. Pull on the plug only. Avoid pulling on the cord

when disconnecting the fan.

 Do not place any objects on the cord and do not bend it.

 It is not advisable to use extension cords, as these may overheat

and cause the risk of fire. Do not use a single extension cord to

operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance

in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan above or near another heat source such as

radiators, stoves or other products that produce heat.

 Do not connect the appliance to the mains power before it has been

properly assembled and positioned.

 Do not run the cord under carpets. Do not cover the cord with

blankets, carpets or similar materials. Place the cord far away from

busy areas or where it cannot be accidentally pulled-out.

 Do not position the fan below a socket outlet.

 Do not operate the appliance outdoors.

WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH

AS THE SOLE MEANS OF DISCONNECTING POWER. WHEN

SERVICING OR MOVING THE FAN, ALWAYS UNPLUG THE

POWER CORD.

 A fan has hot and arcing or sparkling parts inside. It must not be

used in potentially dangerous locations such

as flammable, explosive, chemical-laden or wet atmosphere.

V 01/21