Cisco ASA 5506-X Hardware installatiehandleiding - Pagina 13

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco ASA 5506-X. Cisco ASA 5506-X 26 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5506-X: Snelstarthandleiding (10 pagina's), Snelstarthandleiding (14 pagina's), Eenvoudige installatiehandleiding (11 pagina's), Software Handleiding (37 pagina's), Monteren en aansluiten (12 pagina's), Installatiehandleiding (46 pagina's), Het chassis monteren (10 pagina's)

Prepare for Installation

This chapter prepares you to install your ASA, and contains the following topics:

•

Be sure to read the Regulatory Compliance and Safety Information document

asa5506x-compliance) before installing the ASA.

Take note of the following warnings:

Installation Instructions Warning

Read all installation instructions before connecting the system to a power source. (Statement 1004)

Power Supply Disconnection Warning

Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect

the power at the circuit breaker on DC units. (Statement 12)

Jewelry Removal Warning

Before working on equipment that is connected to a power source, remove jewelry (including rings, necklaces,

and watches). Metal objects will heat when connected to power and ground, and can cause serious burns or

weld the metal object to the terminals. (Statement 43)

Wrist Strap Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch

the backplane with your hand or any metal tool, or you could receive a shock. (Statement 94)

Work During Lightning Warning

Do not work on the system, or connect or disconnect cables during periods of lightning. (Statement 1001)

Short-Circuit Protection Warning

Online Only

Installation Warnings, page 9

Position the ASA, page 10

Safety Recommendations, page 11

Site Environment , page 12

C H A P T E R

(http://www.cisco.com/go/

Cisco ASA 5506-X Hardware Installation Guide