Sony MEX-BT3600U Servicehandleiding - Pagina 6

Blader online of download pdf Servicehandleiding voor {categorie_naam} Sony MEX-BT3600U. Sony MEX-BT3600U 46 pagina's. Bluetooth audio system
Ook voor Sony MEX-BT3600U: Beknopte handleiding (2 pagina's), Installatie/Aansluitingen (2 pagina's), Beknopte handleiding (2 pagina's)

Pagina afdrukken

MEX-BT3600U

10. Check that the other party's voice can be heard from the speak-

er.

11. Check by operating the Volume that the other party's volume

varies.

12. Speak to the microphone of the set to check that the other party

can hear it. (Make sure that there is no large difference from

normal set)

13. Press the [PUSH SELECT] button for 2 seconds to check that

the HF turns off and the set is switched to a telephone call

between cellular phones. (This may not function depending on

the cellular phone)

14. Press the [PUSH SELECT] button for 2 seconds to check that

the HF turns on and the set is switched to a telephone call be-

tween MEX-BT3600U and far end.

15. Press the [PUSH SELECT] button for a short time to check

that a telephone call is terminated. Also, the original source is

returned.

16. Perform ACC OFF -> ON to check if the set is reconnected

automatically to the cellular phone.

7. BT Audio Function Check

1. Connect the set to the BT audio device (or cellular phone fur-

nished with BT audio function) to check that the streaming

logo lights up.

2. Play the BT audio device to check that a sound is generated

from the set when the source is switched to the BT audio.

3. Operate the set ([SEEK – /+], [6] button operation) to check if

it can control the BT Audio.

Note: The functions that can be operated vary depending on the BT audio

device connected.

4. Perform ACC OFF -> ON to check if the set can be recon-

nected to the BT audio device. (Some BT audio devices may

be reconnected automatically)

5. With the BT audio source, press the [6] button to check if the

streaming logo blinks and the set is reconnected to the BT audio

device. (This function is disabled while the set is reconnected

to a cellular phone. Accordingly, this test should be conducted

after the power is turned on and then the HF logo lights up, or

when about 30 seconds elapsed after the power on)

8. Initialize

This should be performed when the set is sent back to the user after

all the checks ﬁ nished successfully.

1. Execute the initialization.

2. Press the [BLUETOOTH] button for 3 seconds to check if the

BT logo lights up.

3. Check that the set is not connected automatically to the cellular

phone that was connected last.

4. With the BT audio source, check that the streaming logo does

not blink when the [6] button is pressed.

9. What to Do after Checking

1. If the board does not need to be replaced

•

Return the bluetooth settings to original ones. (settings when

the set was received from the user)

2. If the board needs to be replaced

•

Return to the factory shipping mode.