Sony MEX-N4280BT Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MEX-N4280BT. Sony MEX-N4280BT 48 pagina's. Bluetooth audio system

Pagina afdrukken

Getting Started

Detaching the Front Panel

You can detach the front panel of this unit to

prevent theft.

Press and hold OFF  until the unit

turns off, press the front panel

release button , then pull the panel

towards you to remove.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel,

the caution alarm will sound for a few

seconds. The alarm will only sound if the

built-in amplifier is used.

Serial numbers

Make sure the serial numbers on the bottom

of the unit and the back of the front panel

are matched correctly. Otherwise you cannot

make BLUETOOTH pairing, connection and

disconnection by NFC.

Attaching the front panel

Resetting the Unit

Before operating the unit for the first time,

or after replacing the car battery or

changing connections, you must reset the

unit.

Press DSPL and

more than 2 seconds.

Note

Resetting the unit will erase the clock setting and

some stored contents.

Setting the Clock

Press MENU, rotate the control dial to

select [GENERAL], then press it.

Rotate the control dial to select [SET

CLOCK-ADJ], then press it.

The hour indication flashes.

Rotate the control dial to set the hour

and minute.

To move the digital indication, press

/ (SEEK –/+).

After setting the minute, press MENU.

The setup is complete and the clock

starts.

To display the clock

Press DSPL.

Preparing a BLUETOOTH

Device

You can enjoy music, or perform handsfree

calling depending on the BLUETOOTH

compatible device such as a smartphone,

cellular phone and audio device (hereafter

"BLUETOOTH device" if not otherwise

specified). For details on connecting, refer to

the operating instructions supplied with the

device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound

may result.

Connecting with a Smartphone by

One touch (NFC)

By touching the control dial on the unit with

an NFC* compatible smartphone, the unit is

paired and connected with the smartphone

automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication

(back)/MODE for