Argo VISION G20 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo VISION G20. Argo VISION G20 12 pagina's.

Pagina afdrukken

OPERATION INSTRUCTION

HOT LAMINATION

(Fig.1)

Select the pouch thick-

ness with the SLIDER.

READY LIGHT would

turn into red and flash.

(Fig.4)

The laminating process is

finished when the whole

document comes out

from the other end of the

machine.

If the document is not laminated properly repeat steps 3 to 4.

CAUTION!

It is important to use the pouch similar to the size of the laminating document.

Documents need to be inserted into the laminating pouch squarely and centrally,

with a margin of around 3 mm from each side. A wider margin may cause folding,

bending or blocking of the laminated document.

HOW TO TURN OFF THE LAMINATING MACHINE

Let the machine cool down for about 30 minutes. Select OFF with a slider, then unplug

the machine from the socket. The machine is turned off now.

CLEANING THE ROLLERS

Before and after the lamination use a cleaning paper to clean the rollers from dust and

glue. When the temperature is rising, place the cleaning paper and make it go through

the laminating machine a few times. It will protect the machines from laminating pouches

being pulled between the rollers. The cleaning paper may be replaced with a cardboard

of the grammature around 250 g/m² with a rough texture.

(Fig.2)

The machine is ready

to use when you hear

the beep sound and the

READY LIGHT turns to

green and stays steady.

(Fig.5)

If the pouch gets jammed

inside, you will hear the

beep sound. Press the

REVERSE BUTTON and

hold it until the pouch is

removed.

(Fig.3)

Insert the document with

the sealed side first into

the entry.

(Fig.6)

To turn off the laminating

machine select OFF posi-

tion with a SLIDER.