Argo VISION G60 Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo VISION G60. Argo VISION G60 13 pagina's.
Pagina afdrukken
OPERATION INSTRUCTION
HOT LAMINATION
(Fig.1)
Set the main switch at
the back of the lamination
machine in the "I" position
then press the ON/OFF
BUTTON.
(Fig.5)
The laminating process is
finished when the whole
document comes out
from the other end of the
machine.
CAUTION!
It is important to use the pouch similar to the size of the laminating document.
Documents need to be inserted into the laminating pouch squarely and centrally,
with a margin of around 3 mm from each side. A wider margin may cause folding,
bending or blocking of the laminated document.
COLD LAMINATION
1.
Set the main switch at the back of the lamination machine in the "I" position then press
the ON/OFF BUTTON.
2.
Select the COLD BUTTON. READY LIGHT would turn into green and flash.
3.
The machine is ready to use when you hear the beep sound and the READY LIGHT
turns to green and stays steady.
4.
Insert the document with the sealed side first into the entry.
5.
Take out the laminated document.
© ARGO S.A.
EN
(Fig. 2)
Select DOCUMENT or
PHOTO BUTTON, for
cold lamination choose
COLD BUTTON. READY
LIGHT would turn into
green and flash.
(Fig.6)
If you want to remove
the document press the
REVERSE BUTTON. You
will hear the beep sound.
If the machine detects
jammed pouch, it will
reverse it itself.
9
(Fig.3)
The machine is ready
to use when you hear
the beep sound and the
READY LIGHT turns to
green and stays steady.
(Fig.7)
To turn off the laminat-
ing machine press the
COLD BUTTON and let
the machine cool down
for about 20-30 minutes.
Turn the main switch at
the back of the machine
to position "O", then
unplug the machine from
the socket.
(Fig.4)
Insert the document with
the sealed side first into
the entry.
(Fig.8)
The device is equipped
with a USB port.
www.argo.pl