Sony MHC-GN660 Gebruiksaanwijzing - Pagina 34
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MHC-GN660. Sony MHC-GN660 48 pagina's. Sony mhc-gn660 stereo system: user guide
Ook voor Sony MHC-GN660: Gebruiksaanwijzing (48 pagina's)
Pagina afdrukken
[]
GAME
INPUT
VIDEO
jack
Use a video cable (not supplied) to connect the
video output of the optional video game player
to this jack. You can then output video through
this system.
[]
GAME
INPUT
AUDIO
L/R jacks
Use audio cords (not supplied) to connect _e
audio output of the optional video game player
to these jacks. You can then output audio
through this system. To listen to the analog
sound of a connected
video game, press GAME.
Notes
• To enjoy video game solmd, see "Enhancing video
game sound" on page 25, or see "Mixing video game
sound with other sotmd source" on page 26 for video
game sotmd effects
• The video game player image may appear on the TV
screen even if the system is tinned oft'.
• If you press GAME while the system is ofl\ the
system turns on, the fimction switches to GAME, and
the equalizer also switches to the previously selected
game preset effect
• If you press GAME while the system is on, the
fimction switches to GAME and the equalizer
antomatically switches 1o the previously selected
game preset effect
[]
VIDEO/MD
(AUDIO)
IN L/R jacks
Use audio cords (not supplied) to connect an
optional analog component
(VCR or MD deck)
to these jacks. You can then output audio
through this system.
[]
CD
DIGITAL
OUT
jack
(MHC-G N990/G N880/G
N770/
GN660
only)
Use a digital optical cable (square, not supplied)
to connect the andio input of the optional MD
deck to this jack. You can then record digital
audio from this system.
Note
There is no digital audio ouiput from this jack during
playback of an MP3 andio track.
[]
VIDEO
OUT
jack
Use a video cable (not supplied) to connect the
video input of TV to this jack.
1
Connect
the audio
cords.
See "Hooking
up optional components"
on
page 33.
2
Press VIDEO/MD to switch the function
to VIDEO or MD.
Start playing the connected
component.
If you cannot select "MD" by pressing
VIDEOiMD
repeatedly,
hold down
VIDEO MD and then press I/(_) while the
power is on. The function will change from
"VIDEO"
to "MD" and "MD" will appear
in the display. To change back to "VIDEO",
repeat the same procedure.
Note
If the solmd is disto*ted or too loud when "VIDEO" is
selected, repeat the operation described above lo
switch to "MD".
Tip
You can also press FUNCTION
repeatedly
on the
remote
to select "VIDEO".
3408