Sony MHC-GT22 Gebruiksaanwijzing - Pagina 20
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MHC-GT22. Sony MHC-GT22 44 pagina's.
Pagina afdrukken
To remove the USB device
1
Press
2
Check that the REC/ERASE indicator
on the unit is off.
3
Press /
4
Remove the USB device.
Other operations
To
Pause playback (or on the
Stop playback
Select a folder
Select a file
Select a folder
and file on an
USB device
while viewing
the folder and
file names on
the display
0
GB
to stop playback.
to turn off the system.
Press
unit)
. To resume
play, press the button
again.
. To cancel
resume play, press
the button twice and
check that "RESUME"
disappears from the
display.
+/
.
/
.
Turn OPERATION
DIAL
on the unit
to select the desired
folder, then press
ENTER
.
Turn OPERATION
DIAL
on the unit to
select the desired file,
then press ENTER
To return to the
previous operation,
press RETURN
the unit.
To
Find a point in
a file
Select Repeat
Play
To change the play mode
Press PLAY MODE
the USB device is stopped. You can
select normal play ("
the folder on the digital music player),
shuffle play ("SHUF" or "
program play ("PGM").
Notes on the USB device
You cannot change the play mode during
playback.
Some time may be needed to start playback
when:
the folder structure is complex.
the memory capacity is excessive.
When the USB device is inserted, the system
reads all the files on the USB device. If there
are many folders or files on the USB device,
it may take a long time to finish reading the
USB device.
Do not connect the system and the USB
device through an USB hub.
With some connected USB devices, after an
operation is performed, there may be a delay
before it is performed by this system.
.
If the system is turned off during Resume
Play mode, when the system is turned on
again playback starts from the beginning of
the MP3 file that was in Resume Play mode.
on
Press
Hold down /
during playback,
and release the button
at the desired point.
REPEAT
repeatedly
until "REP" or "REP1"
appears.
repeatedly while
" for all files in
SHUF"), or