Sony MHC-NX1 Gebruiksaanwijzing - Pagina 21
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MHC-NX1. Sony MHC-NX1 44 pagina's. Mini hi-fi component system
Pagina afdrukken
1
Press CD, then place a CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
3
Press one of the DISC 1~5 buttons to
select a CD.
To programme all the tracks on a CD at
once, proceed to step 5.
4
Turn the jog dial until the desired
track appears in the display.
Disc number
3
PROGRAM
Track number
5
Press ENTER.
The track is programmed. The last
programmed track and the total
programmed track number appear,
followed by the total playing time.
Total playing time
PROGRAM
The last programmed track
6
To programme additional tracks,
repeat steps 3 to 5.
Skip step 3 to select tracks from the
same disc.
7
Press ·.
All the tracks play in the order you
selected.
To cancel Programme Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To
Press
Check the
CHECK on the remote
programme
repeatedly. After the last
track, "CHECK END" appears.
Clear a track
CLEAR on the remote in
from the end
stop mode.
Clear a specific
CHECK on the remote
track
repeatedly until the number of
the track to be erased lights up,
then press CLEAR.
Add a track to
1 Select the disc tray with a
the programme
DISC 1~5 button.
2 Select the track by turning
the jog dial.
3 Press ENTER.
π once in stop mode or twice
Clear the entire
programme
while playing.
Tips
• The programme you made remains in the CD
player even after it has been played back. Press
· to play the same programme again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20
– the total playing time has exceeded 100 minutes.
21