Sony MHC-RXD3/GRX20 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MHC-RXD3/GRX20. Sony MHC-RXD3/GRX20 36 pagina's. Sony operating instructions mini hi-fi component system mhc-rxd3/grx20

Pagina afdrukken

1. Connecting Optional Av Components

Step 3: Presetting radio stations

(continued)

To erase a preset number

1 Press and hold TUNER MEMORY until the

preset number flashes in the display.

2 Press = or + repeatedly to select the

preset number you want to erase.

If you want to erase all preset numbers,

select "ALL ERASE".

3 Press ENTER/NEXT.

When you erase a preset number, the total

number of preset stations decreases by one.

You can add a new preset number after the

last preset number.

To change the AM tuning interval

(for models with the AM TUNING STEP

switch on the rear panel)

The AM tuning interval is factory-preset to

9 kHz (10 kHz in some areas). To change the

AM tuning interval, turn off the system and

set the AM TUNING STEP switch on the rear

panel to 10 kHz (or 9 kHz). Then turn the

system back on. When you change the

interval, all the preset stations will be erased.

Tip

The preset stations are retained for half a day even if

you unplug the power cord or if a power failure

occurs.

Connecting optional

AV components

To enhance your system, you can connect

optional components. Refer to the

instructions of each component.

Connecting audio

components

Select one of the following two connections,

depending on the equipment to be connected

and method of recording.

Connecting an MD deck for digital

recording

You can record from CD into the MD deck

digitally by connecting an optical cable (not

supplied).

To the DIGITAL IN connector

of the MD deck