Sony MHC-RXD6AV - 3 Cd Mini Shelf System Gebruiksaanwijzing - Pagina 38

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony MHC-RXD6AV - 3 Cd Mini Shelf System. Sony MHC-RXD6AV - 3 Cd Mini Shelf System 44 pagina's. Micro hi-fi component system
Ook voor Sony MHC-RXD6AV - 3 Cd Mini Shelf System: Gebruiksaanwijzing (44 pagina's)

Pagina afdrukken

Troubleshooting

If you run into any problem using this

system, use the following check list.

First, check that the power cord is connected

firmly and the speakers are connected

correctly and firmly.

Should any problem persist, consult your

nearest Sony dealer.

General

The display starts flashing as soon as you

plug in the power cord even though you

haven't turned on the system

(demonstration mode).

•Press DEMO when the system is turned

off. The demonstration disappears.

The demonstration mode appears

automatically the first time you plug in

the power cord.

The clock setting/radio setting/timer is

canceled.

•The power cord is disconnected or a

power failure occurs longer than half a

day. Redo the following:

— Clock setting (see "Step 3: Setting the

time" on page 9)

— Preset stations (see "Step 4: Presetting

radio stations" on page 10)

— Timer settings (see "Waking up to

music" on page 33 and "Timer-

recording radio programs" on page

35).

There is no sound.

•Rotate VOLUME clockwise.

•The headphones are connected.

•Insert only the stripped portion of the

speaker cord into the SPEAKER jack.

Inserting the vinyl portion of the speaker

cord will obstruct the speaker

connections.

•There is no audio output during timer

recording.

There is severe hum or noise.

•A TV or VCR is placed too close to the

system. Move the system away from the

TV or VCR.

The sound from the connected source is

distorted.

•If "VIDEO" appears in the display when

you press FUNCTION, switch the display

to "MD".

"0:00" (or "12:00") flashes in the display.

•A power interruption occurred. Set the

clock and timer settings again.

The timer does not function.

•Set the clock correctly.

"DAILY 1", "DAILY 2", and "REC" do not

appear when you press the TIMER SELECT

button.

•Set the timer correctly.

•Set the clock.

The remote does not function.

•There is an obstacle between the remote

and the system.

•The remote is not pointing in the

direction of the system's sensor.

•The batteries have run down. Replace the

batteries.

There is acoustic feedback.

•Decrease the volume level.

•Move the microphone away form the

speakers or change the direction of the

microphone.

The color irregularity on a TV screen

persists.

•Turn off the TV set once, then turn it on

after 15 to 30 minutes. If the color

irregularity still persists, place the

speakers farther away from the TV set.