Cisco ASA 5516-X Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco ASA 5516-X. Cisco ASA 5516-X 8 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5516-X: Hardware installatiehandleiding (32 pagina's), Eenvoudige installatiehandleiding (11 pagina's), Snelstarthandleiding (9 pagina's), Software Handleiding (37 pagina's), Monteren en aansluiten (6 pagina's), Handmatig (14 pagina's)

Cisco ASA 5508-X and ASA 5516-X Quick Start Guide

ASDM can change the ASA FirePOWER module IP address settings over the ASA backplane; but for ASDM to

then manage the module, ASDM must be able to reach the module (and its new IP address) on the

Management 1/1 interface over the network. The recommended deployment allows this access because the

module IP address is on the inside network. If ASDM cannot reach the module on the network after you set

the IP address, then you will see an error.

Choose Wizards > Startup Wizard.

Configure additional ASA settings as desired, or skip screens until you reach the ASA FirePOWER Basic

Configuration screen.

Set the following values to work with the default configuration:

—

IP Address—192.168.1.2

—

Subnet Mask—255.255.255.0

—

Gateway—192.168.1.1

Click I accept the agreement, and click Next or Finish to complete the wizard.

10.

Quit ASDM, and then relaunch. You should see ASA FirePOWER tabs on the Home page.

6. Run Other ASDM Wizards and Advanced Configuration

ASDM includes many wizards to configure your security policy. See the Wizards menu for all available wizards.

6. Run Other ASDM Wizards and Advanced Configuration