Sony R-D-S EON MHC-2900 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony R-D-S EON MHC-2900. Sony R-D-S EON MHC-2900 35 pagina's.

Pagina afdrukken

Presetting Radio

Stations

You can store radio frequencies in the

tuner's memory to tune in your favourite

stations quickly. You can preset up to 20

FM stations, 10 MW stations and 10 LW

stations in any order.

Use the buttons on the unit for presetting

stations.

Do not unplug the mains lead for 20

minutes after presetting stations in order to

maintain the memory. If the memory

disappears, preset the stations again.

1 Press TUNER/BAND repeatedly until

the band you want appears.

—

MW —

2 Press TUNER/TIMER (+/-) to tune in

the station you would like to store.

ie mW

RoR iy

3 Press MEMORY/NEXT.

The preset station number flashes in the

display.

MEMORY

Preset station number

4 Decide ona preset number for the radio

station (1 to 20 for FM, 1 to 10 for MW

and LW). While "MEMORY" is lit, press

TUNER/TIMER (+/-) to display the

preset number you decided on.

5 Press MEMORY /NEXT.

"MEMORY" disappears, and the station

"is stored at the preset number you

decided.

6 Repeat steps 1 to 5 for each station you

would like to store.

To erase a stored station

Store a new station at a previously used

preset station number. It will erase the old

station and replace it with the new station.

if you have trouble storing a station or if

you made a mistake

Repeat steps 1 to 5.

Playing Preset Radio

Stations

Once you have preset the stations, use the

TUNER/TIMER (+/~) buttons to quickly

tune in your favourite stations.

POWER-—-ON

1 Press TUNER/BAND repeatedly to

select the band you want.

—

MW —

2 Press TUNING MODE so that

"PRESET" appears in the display.

FAeger

<li

3 Press TUNER/TIMER (+/-) to tune ina

preset station.

The station frequency appears and the

system begins receiving the stations.

to do this operation.

Set the TUNER/EQ/CD selector to

TUNER.

2 Press the numeric buttons to select the

preset station number you want.

Ree

RDS Receiving

You can enjoy RDS services on this stereo

system. RDS (Radio Data System) is a

broadcasting service which allows stations

to send additional information along with

the regular radio programme signal.

For the customers in the C.LS.

As RDS services are not broadcasted in the

C.LS. , there are no RDS buttons on the

tuner section (EON, PTY) and the remote

commander (EON, RDS DISPLAY).

Receiving RDS Broadcasts

To receive RDS broadcasts, simply make

sure the tuner is set to the FM band.

POWER—ON

1 Press TUN ER/BAND

repeatedly to

select the FM.

2 Press TUNING MODE s0 that

"PRESET" appears in the display.

3 Press TUNER/TIMER (+/-) to tune in a

preset station that provides RDS service.

"RDS" and the station name appear in

the display.

"RDS" is lit while receiving the RDS

broadcast.

To check the RDS information

Press RDS DISPLAY.

Each time you press the button, the display

changes to show the following:

Stationname

-—+

Frequency

Radio text

«<—

Programme type

continue to next page >

Chapter 3 : the Radio