Cisco ASA 5525-X Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco ASA 5525-X. Cisco ASA 5525-X 13 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5525-X: Handleiding voor installatie-instructies (13 pagina's), Snelstarthandleiding (15 pagina's), Software Handleiding (37 pagina's)

Connecting Interface Cables and Verifying Connectivity

Connect a management PC to the Management 0/0 interface for use with the Adaptive

Step 1

Security Device Manager (ASDM).You can connect the PC directly with an Ethernet cable, or

connect the PC and the ASA to the same management network. Make sure the PC is

configured to obtain an IP address using DHCP.

If you want to use the CLI, connect your PC to the console port, and see the CLI configuration

guide for more information.

Connect your networks to the appropriate ports.

Step 2

(Optional) I/O Card.

fiber I/O card, you need to use SFP

modules (not included). See the

hardware installation guide for

information.

Check the LINK/ACT indicators to verify interface connectivity.

Step 3

Unsecured

Network

Management 0/0 interface (RJ-45)

If you have a

Management PC

Secured

Network