Sony SHAKE-7 Gebruiksaanwijzing - Pagina 23

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony SHAKE-7. Sony SHAKE-7 44 pagina's. Mini hifi component system

Pagina afdrukken

About the BLUETOOTH

indicator

The BLUETOOTH indicator lights up or

flashes in blue to show the Bluetooth

status.

System status

Bluetooth standby

Bluetooth pairing

Bluetooth connecting Flashes

Bluetooth connection

is established

Pairing this system with a

Bluetooth device

Pairing is an operation where Bluetooth

devices register with each other

beforehand. Once a pairing operation is

performed, it does not need to be

performed again. If your device is an

NFC-compatible smartphone, the manual

pairing procedure is not necessary.

Place the Bluetooth device

within 1 meter (3 feet) from the

system.

Press BLUETOOTH on the unit

to select Bluetooth function.

"BLUETOOTH" appears in the

display panel.

Note

If the system is connected to a Bluetooth

device, press BLUETOOTH to disconnect

the Bluetooth device.

Hold down BLUETOOTH on the

unit for 2 seconds or more.

"PAIRING" flashes in the display

panel.

Indicator status

Flashes slowly

Flashes quickly

Lights up

Perform the pairing procedure

on the Bluetooth device.

For details, refer to the operating

instructions of your Bluetooth device.

Select the model number of the

unit on the display of the

Bluetooth device.

For example, select "SONY

MHC-GPX88" (or LBT-GPX77/

GPX55/MHC-GPX77/GPX55/

GPX33).

If passkey is required on the Bluetooth

device, enter "0000".

Perform the Bluetooth

connection on the Bluetooth

device.

When pairing is completed and the

Bluetooth connection is established,

Bluetooth device name appears in the

display panel.

Depending on the Bluetooth device,

connection may start automatically

after pairing is completed.

You can check the Bluetooth device

address by pressing DISPLAY

repeatedly.

Notes

• You can pair up to 9 Bluetooth devices. If the

10th Bluetooth device is paired, the least

recently connected device will be replaced by

the new one.

• "Passkey" may be called "Passcode", "PIN

code", "PIN number" or "Password", etc.,

depending on the device.

• The pairing standby status of the system is

canceled after about 5 minutes. If pairing is

not successful, repeat from step 1.

• While connected to a Bluetooth device, this

system cannot be detected and connection

cannot be established from another Bluetooth

device which is never paired before.

• If you want to pair with another Bluetooth

device, repeat steps 1 to 6.