Sony SRS-X5 Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Sony SRS-X5. Sony SRS-X5 2 pagina's. Personal audio system
Ook voor Sony SRS-X5: Referentiehandleiding (2 pagina's)
Pagina afdrukken
4-529-080-11(1)
Personal Audio System
Quick Start Guide
Système audio personnel
Guide de prise en main
Guía de inicio rápido
Sistema de audio personal
SRS-X5
©2014 Sony Corporation Printed in China
English
Manuals supplied
Quick Start Guide (this document)
Provides you with instructions on how to connect the unit with
BLUETOOTH devices and basic operations.
Reference Guide
Provides you with precautions and product specifications.
Help Guide
Read the Help Guide on your computer or smartphone, when you want
to know how to use the unit in greater detail. The Help Guide also
contains a troubleshooting guide which provides you with remedies for
the problems you might encounter.
URL:
http://rd1.sony.net/help/speaker/srs‑x5/uc/
Two-dimensional code:
Charging the Unit
This unit has a built-in lithium-ion rechargeable battery. Charge the battery
before using the unit for the first time.
Lit (orange)
AC adaptor
(supplied)
DC IN
Charging starts when the unit is connected to an AC outlet via the AC
adaptor, and the CHARGE indicator lights up orange. Charging is
completed in about four hours and the indicator goes off.
How to Make Wireless Connection with BLUETOOTH
Devices
Select your case from the 3 pairing types, below. BLUETOOTH devices need to be
"paired" with each other beforehand.
Pairing and connecting with a BLUETOOTH
device
The unit can be paired with up to eight BLUETOOTH devices. When pairing with
two or more BLUETOOTH devices, perform the following pairing procedure for
each device.
1
Press the / (power) button to turn on this unit.
The / (power) indicator lights up green.
Lit
(green)
2
Tap the
(BLUETOOTH)
PAIRING button.
The
(BLUETOOTH) indicator begins to flash white.
Flashing
(white)
When you use the BLUETOOTH function for the first time, and when you
only tap the
(BLUETOOTH)
PAIRING button, the
(BLUETOOTH)
indicator will begin to flash white quickly and the unit enters pairing mode
automatically.
3
Tap and hold the
(BLUETOOTH)
PAIRING button until beeps
are heard and the
(BLUETOOTH) indicator begins to flash
white quickly.
The unit enters pairing mode.
Fast flashing
(white)
4
Perform the pairing procedure on the BLUETOOTH device to
detect this unit.
When a list of detected devices appears on the display of the BLUETOOTH
device, select "SONY:SRS-X5."
If passkey input is required on the display of a BLUETOOTH device, input
0000
"
."
5
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the
(BLUETOOTH)
indicator on the unit stays lit.
Connecting with a paired BLUETOOTH device
1
Turn on this unit.
2
Tap the
(BLUETOOTH)
PAIRING button.
The
(BLUETOOTH) indicator begins to flash white.
3
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the
(BLUETOOTH)
indicator on the unit stays lit.
Connecting with a smartphone by One-
touch (NFC)
By touching the unit with a smartphone, the unit is turned on automatically and
then proceeds to pairing and BLUETOOTH connection.
Compatible smartphones
NFC-compatible smartphones with Android 2.3.3 or later installed
NFC
NFC (Near Field Communication) is a technology enabling short-range wireless
communication between various devices, such as smartphones and IC tags.
Thanks to the NFC function, data communication - for example, BLUETOOTH
pairing - can be achieved easily by simply touching NFC compatible devices
together (i.e., at the N-Mark symbol or location designated on each device).
1
Set the NFC function of the smartphone to on.
For details, refer to the operating instructions supplied with the smartphone.
If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1:
ˎ
ˎ
proceed to step 2.
If your smartphone OS is Android 4.1 or later: proceed to step 4.
ˎ
ˎ
2
Download and install the app "NFC Easy Connect."
"NFC Easy Connect" is a free Android app you can download from Google
Play.
Download the app by searching for "NFC Easy Connect" or access it by
using the following two-dimensional code. Fees may be charged for
downloading the app.
To download by the two-dimensional code, use a
two-dimensional code reader app.
Note
The app may not be available in some countries and/or regions.
ˎ
ˎ
3
Start "NFC Easy Connect" on the smartphone.
Make sure that the app screen is displayed.
4
Touch this unit with the smartphone.
Unlock the screen of the smartphone beforehand.
Keep touching the smartphone on the N marked part of the unit until the
smartphone responds. If the unit is off, it will turn on when the
smartphone touches it.
Smartphone responds
(unit recognized)
Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established, the
(BLUETOOTH)
indicator on the unit stays lit.
To disconnect, touch the unit with the smartphone again.
Hint
If you cannot connect the unit, try the following.
Start the app on the smartphone, and move the smartphone slowly over the N
ˎ
ˎ
marked part of the unit.
If the smartphone is in a case, remove it from the case.
ˎ
ˎ
Make sure that the app screen is displayed on the smartphone.
ˎ
ˎ
Listening and Calling
Operate the unit after making BLUETOOTH connection with your BLUETOOTH device.
Listening to music
Profile: A2DP, AVRCP
Start playback on the BLUETOOTH device, and adjust the volume.
Set the volume at an appropriate level on the connected device, and adjust the
volume with the VOL –/+ buttons on the unit.
Making a call/Receiving a call
Profile: HSP, HFP
Microphone
Operate your smartphone to make a call.
To terminate a call, press the
button on the unit.
Press the
button on the unit when an incoming call arrives.
Operate in the same way when an incoming call arrives while you are listening
to music.
The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any
ˎ
ˎ
use of such marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
ˎ
ˎ
States and in other countries.
Android and Google Play are trademarks of Google Inc.
ˎ
ˎ
Other trademarks and trade names are those of their respective owners.
ˎ
ˎ
Français
Manuels fournis
Guide de prise en main (ce document)
Vous fournit les instructions pour connecter l'appareil avec des
périphériques BLUETOOTH ainsi que les opérations de base.
Guide de référence
Vous fournit les précautions et les spécifications du produit.
Manuel d'aide
Lisez le Manuel d'aide sur votre ordinateur ou votre téléphone
intelligent lorsque vous voulez avoir plus de détails sur l'utilisation de
l'appareil. Le Manuel d'aide contient également un guide de
dépannage qui vous fournit des solutions aux problèmes que vous
pourriez rencontrer.
URL :
http://rd1.sony.net/help/speaker/srs‑x5/uc/
Code en deux dimensions :
Chargement de l'appareil
L'appareil est équipé d'une pile rechargeable intégrée au lithium-ion. Chargez la
pile avant d'utiliser l'appareil pour la première fois.
S'allume
Adaptateur CA
(orange)
(fourni)
DC IN
Le chargement démarre lorsque l'appareil est branché à une prise de
courant via l'adaptateur CA, et le témoin CHARGE (orange) s'allume. Le
chargement dure environ 4 heures, puis le témoin s'éteint.
Comment établir une connexion sans fil avec des
périphériques BLUETOOTH
Sélectionnez votre cas parmi les 3 types de pairage ci-dessous. Il est nécessaire au
préalable de procéder au « pairage » des périphériques BLUETOOTH.
Pairage et connexion avec un périphérique
BLUETOOTH
Cet appareil peut être pairé avec un maximum de huit périphériques
BLUETOOTH. Voici la procédure de pairage pour chacun des périphériques lors
du pairage de deux périphériques BLUETOOTH ou plus.
1
Appuyez sur la touche / (alimentation) pour mettre
l'appareil sous tension.
Le témoin / (alimentation) s'allume en vert.
S'allume
(vert)
2
Appuyez sur la touche
(BLUETOOTH)
PAIRING.
Le témoin
(BLUETOOTH) se met à clignoter en blanc.
Clignote
(blanc)
Lorsque vous utilisez la fonction BLUETOOTH pour la première fois et que
vous touchez simplement la touche
(BLUETOOTH)
PAIRING, le témoin
(BLUETOOTH) commencera à clignoter rapidement en blanc et l'appareil
passera automatiquement en mode de pairage.
3
Touchez la touche
(BLUETOOTH)
PAIRING et maintenez‑la
enfoncée jusqu'à ce que vous entendiez des bips sonores et
que le témoin
(BLUETOOTH) commence à clignoter
rapidement en blanc.
Le mode de pairage de l'appareil est activé.
Clignote rapidement
(blanc)
4
Effectuez la procédure de pairage sur le périphérique
BLUETOOTH pour détecter l'appareil.
Lorsque la liste de périphériques détectés apparaît sur l'écran du
périphérique BLUETOOTH, sélectionnez « SONY:SRS-X5 ».
Si un code est demandé sur l'écran d'un périphérique BLUETOOTH,
0000
saisissez «
».
5
Vérifiez la connexion BLUETOOTH sur le périphérique
BLUETOOTH.
Lorsque l'appareil est connecté au périphérique BLUETOOTH, le témoin
(BLUETOOTH) s'allume.
Connexion avec un périphérique
BLUETOOTH pairé
1
Allumez l'appareil.
2
Appuyez sur la touche
(BLUETOOTH)
PAIRING.
Le témoin
(BLUETOOTH) se met à clignoter en blanc.
3
Effectuez la connexion BLUETOOTH sur le périphérique
BLUETOOTH.
Lorsque l'appareil est connecté au périphérique BLUETOOTH, le témoin
(BLUETOOTH) s'allume.