Sony STR-DA6400ES - Multi Channel Av Receiver Netwerkhandleiding - Pagina 33
Blader online of download pdf Netwerkhandleiding voor {categorie_naam} Sony STR-DA6400ES - Multi Channel Av Receiver. Sony STR-DA6400ES - Multi Channel Av Receiver 46 pagina's. Multi channel av receiver
Ook voor Sony STR-DA6400ES - Multi Channel Av Receiver: Handleiding voor snelle installatie (2 pagina's), Specificaties (2 pagina's), Gebruiksaanwijzing (42 pagina's), Beperkte garantie (1 pagina's)
Pagina afdrukken
Troubleshooting
Cannot find the server.
• Check the followings:
– Is the router is turned on?
– If there is another device between this
device and the router, check that device
is turned on.
– Are all of the cables are connected
correctly and securely?
– Is the settings to make sure that they
match the router's settings (DHCP or
fixed IP address)?
• When using a computer, check the
following:
– the built-in firewall settings for the
computer's operating system.
– the firewall settings of your security
software. To check the firewall settings
of your security software, refer to your
security software's Help section.
• Register this device with the server. For
details, see the instructions supplied with
the server.
• Wait for a few moments, and then try
connecting to the server again.
Content does not play back on the
device on your home network.
• Check whether or not another device on
your home network is already playing
back audio delivered from the receiver.
You cannot play back audio delivered from
the receiver on two or more devices on
your home network at the same time.
• Check whether or not the device on your
home network supports "DLNA
Tuner_1_0." Contact the manufacturer of
the device you are using to check whether
or not it supports "DLNA Tuner_1_0."
• When using a computer, check the
following:
– The built-in firewall settings for the
computer's operating system.
– The firewall settings of your security
software. To check the firewall settings
of your security software, refer to your
security software's Help section.
Sound is not output from the device on
your home network, or the sound cuts
off or has noise.
• Check the following:
– Is a component playing back the audio
selected?
– Is the device you selected and the audio
cord connected surely?
– Is the server function of the receiver set
to ON?
– Does the device on your home network
support "DLNA Tuner_1_0"?
Contact the manufacturer of the device
you are using to check whether or not it
supports "DLNA Tuner_1_0."
If the trouble is other than the cases above and
the trouble is not solved even if you wait for a
while, press ?/1 on the remote or POWER on
the receiver to turn the receiver on again.
33
GB