Sony ZS-SN10 Servicehandleiding - Pagina 4
Blader online of download pdf Servicehandleiding voor {categorie_naam} Sony ZS-SN10. Sony ZS-SN10 50 pagina's. Personal audio system
Ook voor Sony ZS-SN10: Gebruiksaanwijzing (36 pagina's), Specificaties (2 pagina's)
Pagina afdrukken
ZS-SN10
Basic Operations
Playing a CD
3
Connect the supplied AC power cord.
1
Press PUSH Z OPEN/CLOSE to
open the CD lid and place the CD on
the CD tray.
2
Press PUSH Z OPEN/CLOSE to
close the CD lid.
To
select a group*
remove the CD
turn on/off the player
*
2
This function works for ATRAC CDs/MP3 CDs only.
3
*
Once you open the CD lid, the track to start play will change to
the beginning of the first track.
The structure of ATRAC CDs/MP3 CDs
ATRAC CDs/MP3 CDs consist of "files" and "groups." A
"file" is equivalent to a "track" of an audio CD. A "group"
Notes
is a bundle of files and is equivalent to an "album."
• If ATRAC3plus files and
For MP3 CDs, this CD player recognizes an MP3 folder as
MP3 files are recorded on
a "group" so that ATRAC CDs and MP3 CDs can be
the same CD, this CD
player plays the
operated in the same way.
ATRAC3plus first.
In this manual, we use the word "track" in description of
• The playback capability of
the operations available for both ATRAC CDs/MP3 CDs
this CD player may vary
and audio CDs, and the word "file" for the operations
depending on the quality of
available for ATRAC CDs/MP3 CDs only.
the disc and the condition of
the recording device.
Playing order of ATRAC CDs and MP3 CDs
• Characters that can be
displayed on this CD player
For ATRAC CDs, files are played in the order selected in
are listed below.
SonicStage.
– A to Z
For MP3 CDs, the playing order may differ depending on
– a to z
the method used to record MP3 files on the disc. In the
– 0 to 9
following example, files are played in order of 1 to 7.
– ! " # $ % & ' ( ) * + , - . / :
; < = > ? @ [ \ ] ^ _ ` { | }
~
If you use other characters
on your computer using
software such as
SonicStage, they are
displayed as "–" on this CD
player.
• On a disc that has
ATRAC3plus/MP3 files, do
not save files in other
formats and do not make
unneccessary groups.
4
SECTION 2
GENERAL
1, 2
With the label side up
Press
2
+ to go forward and – to go
backward
PUSH Z OPEN/CLOSE*
3
POWER
Group
File
ATRAC CD
MP3 CD
3
Press u (N on the remote) (direct
power-on).
The player plays all the tracks once.
Display
Audio CD
Playing time
Track number
Note
Use these buttons for additional operations
Before playing an ATRAC
CD/MP3 CD, this player
reads all file and group
information on the CD.
Depending on the file
structure, it may take more
than a minute to read them.
During this time, "Reading"
is displayed.
Tips
To
• To listen through
adjust the volume
headphones, connect the
headphones to the i
(headphones) jack.
stop playback
• Playback starts from the
pause playback
track you last stopped
playing (Resume play).
To cancel the resume play
to start play from the
go to the next track
beginning of the first track,
press x in stop mode.
go back to the
previous track
*
1
The button has a tactile dot.
Notes on ATRAC CDs
• Maximum number of groups: 255
Maximum number of files: 999
• CD-Rs/CD-RWs recorded in the ATRAC3plus format cannot be
played on your computer.
Notes on MP3 CDs
• Maximum number of groups: 255
Maximum number of files: 511
Maximum directory level: 8
• A group that does not include an MP3 file is skipped.
• Be sure to add the file extension "mp3" to the file name.
However, if you add the file extension "mp3" to a file other than
an MP3 file, the player will not be able to recognize the file
properly.
• This player can play bit rates of 32 to 320 kbps, and sampling
frequencies of 32/44.1/ 48 kHz.
• To compress a source in an MP3 file, we recommend setting the
compression parameters to "44.1 kHz," "128 kbps," and
"Constant Bit Rate."
• To record up to the maximum capacity, set the writing software
to "halting of writing."
• To record to the maximum capacity at one time up on media that
has nothing recorded on it, set the writing software to "Disc at
Once."
This section is extracted from
instruction manual.
ATRAC CD/MP3 CD*
File name
File number
Playing time
* When playing an MP3 CD, "MP3"
appears in the display.
POWER
u
x
VOLUME –, +
–, +
i
>
.
Press
1
1
VOLUME +*
, – (VOL +*
, – on the
remote)
x
u*
1
(X on the remote)
Press the button again to resume play after
pause.
>
.