Digitex USB 2.0 Flash Drive Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digitex USB 2.0 Flash Drive. Digitex USB 2.0 Flash Drive 4 pagina's.

Pagina afdrukken

Driver installation

Driver Installation (Linux Kernel 2.4.0+)

1. Plug in the device

2. Please check whether it had been enumerated in file /proc/scsi/scsi. If not please

check whether modules had been loaded, i.e : usb-storage, scsi_mod, sd_mod, ...,

by using "/sbin/lsmod". If not become root or use sudo with "modprobe usb-storage".

3. If the device is enumerated in /proc/scsi/scsi, then it is OK to mount the Pen

plus

Drive

2.0 to existed desired directory with "mount/dev/sda1 <desired directory>". If

there is no partition existed, please omit the digit. "a" means first LUN (Logical Unit),

then "b", "c", ... and the digit means the partition number. If fail, please send us the

output of 'dmesg' and make sure those messages are collected after the USB

FlashDrive 2.0 is plugged in.

4. You may use "Control Center" from Gnome -> Mount Points (left side) -> Hard

Drive and select the appropriate device and partition, specify the mount point

(existed directory) and others, i.e. uid, gid, permission, ..., of course you need root

privilege. Suggest you un-mount it to avoid error messages on the next booting.

5. To eject, use "eject <desired directory>" to flush the buffer and clear the mount

information.

6. After mounting the USB FlashDrive 2.0, you may do any file operations on it.

7. Some latest distributions may automatically mount the USB device on the

desktop.

8. If there is any problem, please attach the "dmesg" output and/or

/var/log/messages.

Drive disconnection

Windows 98 / 98SE

Wait till the LED light dimmed, then remove directly from USB port.

Windows ME / 2000 / XP

Double-click (Unplug or Eject Hardware)

of your screen. A window will appear, select the name of the device that you want to

remove, and then click the "Stop" button.

Confirm the device that you want to remove by clicking "OK", wait till the LED light

dimmed, then remove from USB port.

Mac OS 9.x or above

Drag the device icon to the Trash Can, confirm remove, wait till LED light dimmed,

then remove from USB port.

Linux Kernel 2.4.0 or above

To remove, use "eject <desired directory>" command to flush the buffer and clear the

mount information.

Warranty

Product is covered by a 1 year warranty. If this product is found to be defective, it will

be replaced with no cost for you. You may return it with original cash register receipt

to the place of purchase. This warranty does not reply to normal wear or to damage

resulting for abnormal use, misuse, abuse or neglect or accident Digitex will not be

liable for any incidental, consequential or special damages, however caused, for

breach of warranty or otherwise. It is recommended that you keep a minimum of two

copies of important data and that the USB drive does not hold the only copy of any of

your documents.

in the system tray in the lower right part