Cisco ASR 9000 Series Configuratiehandleiding - Pagina 6

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 pagina's. Line card
Ook voor Cisco ASR 9000 Series: Netwerkinstellingen configureren (26 pagina's), Configuratiehandleiding (50 pagina's), Handmatig (24 pagina's), configureren (46 pagina's), Handmatig (44 pagina's), Snelle referentiehandleiding (7 pagina's)

Pagina afdrukken

Cisco ASR 9000 Series Configuratiehandleiding

Information About T3/E3 Controllers and Serial Interfaces

3. For detailed information about loopback support, see the

Loopback Support

Cisco 1-Port Channelized OC-3/STM-1 SPA

This section describes the types of loopback supported on the 1-Port Channelized OC-3/STM-1 SPA:

•

Cisco 2-Port Channelized OC-12c/DS0 SPA

This section describes the types of loopback supported on the 2-Port Channelized OC-12c/DS0 SPA:

•

Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide

450

Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router

"Loopback Support" section on page

For SONET controller:

–

Local loopback

Network line loopback

–

For T3:

Local loopback

–

Network loopback

–

Remote loopback line (Use FEAC in C-Bit mode for T3)

–

Remote loopback payload (Use FEAC in C-Bit mode for T3)

–

For E3:

Local loopback

–

Network loopback

–

For T1:

–

Local loopback

–

Network line loopback

–

Remote line FDL ANSI loopback (also known as Remote CSU loopback - ESF mode)

Remote line FDL Bellcore loopback (also known as Remote SmartJack loopback - ESF mode)

–

Remote line inband loopback (SF inband loopback)

–

Remote payload FDL ANSI loopback (ESF remote payload loopback)

–

For E1:

Local loopback

–

Network line loopback

–

For T3

–

Local loopback

Network line loopback

–

For ports

Local line loopback

–

Network line loopback

–

450.

OL-32684-01