Cisco Catalyst 3560-E Series Aan de slag handleiding - Pagina 13

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Catalyst 3560-E Series. Cisco Catalyst 3560-E Series 25 pagina's. Switches and power supply modules
Ook voor Cisco Catalyst 3560-E Series: Product Bulletin (5 pagina's), Vragen en antwoorden (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (5 pagina's), Installatie-opmerkingen (20 pagina's)

Pagina afdrukken
Cisco Catalyst 3560-E Series Aan de slag handleiding
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take
special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting or
servicing the unit in the rack.
Warning
This unit is intended for installation in restricted access areas. A restricted access area
can be accessed only through the use of a special tool, lock and key, or other means of
security. Statement 1017
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 1030
To comply with the Telcordia GR-1089 Network Equipment Building Systems (NEBS)
Caution
standard for electromagnetic compatibility and safety, connect the Ethernet cables only to
intrabuilding or nonexposed wiring or cabling.
The grounding architecture of this product is DC-isolated (DC-I)
Note
Statement 1006
13