Cisco Catalyst 3750-E Series Aan de slag handleiding - Pagina 16

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Catalyst 3750-E Series. Cisco Catalyst 3750-E Series 27 pagina's. Switches and power supply modules
Ook voor Cisco Catalyst 3750-E Series: Aan de slag handleiding (33 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (5 pagina's), Product ondersteunings bulletin (6 pagina's), Installatie-opmerkingen (20 pagina's)

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this

equipment. Statement 1030

To comply with the Telcordia GR-1089 Network Equipment Building Systems (NEBS)

Caution

standard for electromagnetic compatibility and safety, connect the Ethernet cables only to

intrabuilding or nonexposed wiring or cabling.

The grounding architecture of this product is DC-isolated (DC-I)

Note

Before Attaching the Brackets

To install the switch in a rack, you must first remove the screws from the switch chassis so that the

mounting brackets can be attached. For attachment at the front-mounting position, remove two

Phillips truss-head screws from the switch side panels. For attachment at the mid-mounting position,

remove one screw. For attachment at the rear-mounting position, remove two screws.

47 X

X2 -1

X2 -2

C at al ys

t 3 7 5 0 -E

48 X

SE RI ES