Digitone proseries blocker Bedieningshandleiding - Pagina 12

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Digitone proseries blocker. Digitone proseries blocker 17 pagina's. Automatically blocks and routes screened calls with caller id

Pagina afdrukken

Digitone proseries blocker Bedieningshandleiding

1. Complete Factory Reset

Global Block Method Code 97#*

If you want to block all callers and invite only specific numbers, you can use Code 97 # * to disable

the default Global Invited List and create your own invited call list. To enable this feature, press and hold

the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays enter 97 #*, display shows function. NOTE: that when Code 97 #* is

stored, all calls will be Blocked, answered and hungup on until you add Invited numbers.

Creating your own Invited Caller list

You can invite preferred callers using the Invite Button on the front panel or through programming. See

Programming Numbers - Invited, VIP and Blocked on page 6.

Reset DPB Call List Settings Code 98#*

Entire Caller List Deletion WARNING: This will delete all numbers from all lists! To delete ALL

numbers stored, enter programming: press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays, enter 98 # *,

display shows: "ALL NBR DELETED". All numbers stored from all lists will be cleared.

Deleting Individual Invited, VIP or Blocked Numbers

To delete a single number you have stored, enter programming: press and hold the Program Button

for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 98, enter the phone number you want to delete followed by the * key. Example for

deleting a number enter: 98, 890-555-1212 *, display shows function.

Reset DPB User Settings Code 99#*

To reset the DPB user settings to factory settings but not delete any call lists, Press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays, enter 99 # *.

Display All Operating Codes Code 92

Press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",

when the prompt for "Enter Code" displays, enter 92 to see the current settings. The factory default list

is pg1: 16, 28, 30, 47, 49, 59, pg2: 70, 73, 75, 77, 80, 85, pg3: 87, 91, 96. These codes can

change when the user enables alternate settings. See list of all operating codes and functions below.

Code 16 FSK CID ENABLED Standard Caller ID Mode (Default)

Code 17 DTMF CID ENABLED

Code 20 SPOOFING SAVED Spoofed Number Store

Code 21 SPOOFING LIST Spoofed Number List Displayed

Code 27 CODE SAVED LCD Backlight Time

Code 28 LED ENALBLED (Default)

Code 29 LED DISABLED

Code 30 STANDARD MODE (Default)

Code 31 BUSINESS MODE

10. Code 32 STANDBY MODE

11. Code 33 SELECT MODE

12. Code 40 NBR BLOCK SAVED

13. Code 40### [number] * FIND NUMBER in Blocked List

14. Code 40#* BLK NBRS DELETED Deletes blocked numbers except programmed entries

15. Code 41 NON AUTO DEL BLK Blocked Number List Displayed

16. Code 42 DIALED NBR SAVED Block Outgoing number

17. Code 43 DIALED BLK LIST Blocked Dialed Outgoing number list displayed

18. Code 44 NAME BLOCK Name List Displayed

19. Code 46 AUTO BLK DEL ON First in First Out Enabled

20. Code 47 AUTO BLK DEL OFF First in First Out Disabled (Default)

21. Code 48 NAME BLK PRV ON Private Name Block Enabled

Page