Cisco Firepower 4100 Series Handmatig - Pagina 13

Blader online of download pdf Handmatig voor {categorie_naam} Cisco Firepower 4100 Series. Cisco Firepower 4100 Series 36 pagina's. Rack-mount and ground the chassis
Ook voor Cisco Firepower 4100 Series: Producthandleiding (17 pagina's), Handmatig (8 pagina's), Handleiding voor onderhoud en upgrades (20 pagina's), Handmatig (8 pagina's), Handmatig (42 pagina's), Handmatig (38 pagina's)

Pagina afdrukken

Overview

1-Gb Network Module with Hardware Bypass

The following figure shows the front panel view of the 1-Gb network module with hardware bypass

(FPR4K-NM-8X1G-F). Pair ports 1 and 2, 3 and 4, 5 and 6, and 7 and 8 to form hardware bypass paired sets.

Note

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

FXOS Compatibility

Figure 10: FPR-NM-8X1G-F

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

for the software compatibility matrix.

Captive screw/handle

Ethernet X/1

Ports 1 and 2 are paired together to form a

hardware bypass pair. LED B1 applies to this

paired port.

Ethernet X/2

Ports 5 and 6 are paired together to form a

hardware bypass pair. LED B3 applies to this

paired port.

1-Gb Network Module with Hardware Bypass

Guide. See

Cisco Firepower 4100/9300

8 network activity LEDs

• Left LED—Green indicates network activity

when a 10M/100M/1G connection is made.

• Right LED—Not in use at this time.

Ethernet X/2

Ports 3 and 4 are paired together to form a

hardware bypass pair. LED B2 applies to this

paired port.

Ethernet X/2

Ports 7 and 8 are paired together to form a

hardware bypass pair. LED B4 applies to this

paired port.

Overview