argon audio Forte A5 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} argon audio Forte A5. argon audio Forte A5 9 pagina's.

3. Quick start

1. Connect the speakers using the supplied speaker cable.

2. Connect the power cord into an electric outlet and into the back of the left speaker

(which has the amplifier). The LED light on the loudspeaker will turn on.

3. To pair your Bluetooth device, turn on the speakers and press and hold "PAIRING"

on your remote for about 3 seconds, until the LED starts blinking. Your speakers

are now in pairing mode. Activate Bluetooth on your playback device and scan for

devices. Your speaker will show up as "ARGON FORTE". Press "pair" and you are

connected. The LED light on the speaker will change to solid blue. You're now

ready to start listening to music!

4. Besides Bluetooth, your Forte speakers have four more inputs: Optical1, Optical2,

AUX and Phono. Use the included remote control to select your wished input.

5. When connecting a turntable to the Phono input on the Forte speaker, remember

to also connect the ground wire from the turntable, to the metal GND screw.

6. If you have an active subwoofer, connect it to the Forte speaker's SUB OUTPUT,

using a RCA cable and then connect the cable to Your Subwoofer.

7. Your Argon Forte speakers support most Samsung, Sony and LG remote functions

for "Volume +/-" and "Mute" using IR remotes only.

8. We recommend a running-in time of your Forte speakers of approximately 15-20

hours at normal listening level before you decide on the final positioning of the

speakers. During the running-in time the drive units will settle in and perform as

intended.

9. For optimal sound performance, the best listening position is at ear level with the

speakers placed not too far from a wall.

w w w . a r g o n a u d i o . c o m

F o r t e A 4 & A 5