Digitrax DZ126IN Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Digitrax DZ126IN. Digitrax DZ126IN 12 pagina's. Complete train control

SuperSonic Silent Operation and Torque Compensation

The factory settings in the decoder provide silent, smooth operation of your loco-

motive under most conditions. For more information about these settings, please

see the Digitrax Decoder Manual or our website.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is 000

for OFF. To turn on transponding, program CV61 to a value of 002. This al-

lows you to use Digitrax transponding to keep track of your rolling stock. When

transponding is enabled, the front light of the locomotive will flicker slightly to

indicate transponding signal is being communicated. For optimal transponding

operation, we recommend that you hook up the forward and rear lights as shown

above.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the initial factory settings. To reset all

CV values, program CV08 to a value of 008. You also have the option of reset-

ting all the CV values except the 28 speed step tables and CV60 selected sound

scheme. To do this program CV08 to a value of 009.

Function Outputs on the DZ126IN

The DZ126IN is set up at the factory to control two function outputs.

The DZ126IN is configured to control the forward and reverse lights on the lo-

comotive through the white lead and yellow lead using Function 0 (F0F-forward

and F0R-reverse) for directional lighting. Both function outputs can be easily set

up with Digitrax FX 3 lighting effects or as standard on/off functions with the fol-

lowing operational qualifiers:

Forward or Reverse direction of travel, or

Whether F0 is on or off, or

Both direction of travel and whether F0 is on or off, or

Whether the locomotive is stopped or moving.

Master Light Switch

Each of the two function outputs can be programmed to turn on and off with the

F0 ON/OFF key on your throttle, creating a Master Light Switch. The CV

values for creating this effect are listed in the Digitrax Decoder Manual in the

section: Setting up FX & FX3 Effects On Function Outputs.

— 7 —