Digitrax UT1 Handmatig - Pagina 11

Blader online of download pdf Handmatig voor {categorie_naam} Digitrax UT1. Digitrax UT1 11 pagina's. Traditional style loconet throttle

Pagina afdrukken

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different form that to

which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Note that any modifications to the equipment not expressly approved by Digitrax voids

the user's authority to operate under and be in compliance with CFR 47 rules, as admin-

istered by the Federal Communication Commission. Digitrax believes any conscien-

tiously installed equipment following guidelines in this manual would be unlikely to

experience RFI problems.

For Canadian Users:

"This digital apparatus does not exceed the Class B limits for Radio noise emission

from digital apparatus set out in the Radio Interference Regulation or the Canadian

Department of Communications."

Le present appariel numerique n emet pas de bruits radio-electriques depassant les lim-

ites applicables aux appareils numeriques de la classe B prescrites dans le Reglement

sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.

8.0 Warranty and Repair Information

Digitrax gives a one year guarantee against manufacturing defects on

UT1 throttles. These units are not user serviceable (opening the case voids your

warranty). If a defect occurs, return the unit to us for service. We will repair or

replace these units at our discretion at no charge to you for one year from pur-

chase date. Proof of date purchased is required for warranty repair. This war-

ranty excludes damage due to abuse, such as failure to properly protect against

input over current with a fuse or circuit breaker or applying excessive input

voltage to the unit. We will make any repair needed because of physical dam-

age or electrical abuse at fair and reasonable rates. See www.digitrax.com for

complete warranty information and repair charges for non-warranty repairs.

All warranties on Digitrax products are limited to refund of purchase

price or repair or replacement of Digitrax products at the sole discretion of

Digitrax. In the event that Digitrax products are not installed or used in accor-

dance with the manufacturer's specifications, any and all warranties either

expressed or implied are void. Except to the extent expressly stated in this sec-

tion, there are no warranties, express or implied, including but not limited to

any warranties of merchantability or fitness for a particular purpose.

Digitrax, Inc. reserves the right to make changes in design and specifications,

and/or to make additions or improvements in its products without imposing any

obligations upon itself to install these changes, additions or improvements on

products previously manufactured.

Index

ACQ/DISP Key 7

Address "00" 4

Address Mode 10

Address Selection Flow Chart 15

Address Selector Rotary Dials 7

Analog Locomotive 4

battery 3, 9

Configuration Options 8

Decoder Won't Respond 17

Direction Control 12

Direction Toggle Switch 7

Dispatching Locomotives 14

Emergency Stop 17

F0/F3 Key 7

F1/F4/ON Key 8

F2/F5/OFF Key 8

FCC Information 17

Four Top Row LEDs 8

Functions 16

Functions on Consisted Locos 16

ID number 9

intermittent operation 17

Lights 16

Locomotive Speed Control 12

LocoNet 3

Mechanical Drive Train Problems 17

non-decoder equipped locomotive 4

Programming 11

Quik Mode 11, 13

Run A DCC Equipped Locomotive 5

Run/Stop Key 7

Running a Locomotive 4

Safe Mode 8, 10, 12

Selecting a Locomotive 12

Shift Key 7

Status Indicator 7

Stop Mode 10

Switch Mode 11

Throttle Knob 6, 12

Track Power 3, 9

Troubleshooting 17

UP5 Universal Panel 9

UT1 Configuration Mode 8

UT1 Won't power up when plugged in

Walkaround Operation 9

Warranty and Repair 18