Digitroll XeedSystem Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digitroll XeedSystem. Digitroll XeedSystem 17 pagina's.

2.4

Working position

At the top middle of the main screen a working position icon can be seen. This

icon functions as a button as well.

If the machine is in working position but the system reports lifted working

position, with this quick button, the working position's interpretation can be

changed.

2.5

For precise area measurement it is crucial to set the working width and to

calibrate the speed properly.

These options can be set on the machine settings screen, which can be

accessed from the settings, or by pressing the area icon on the main screen.

By holding the area button (at least for 2 secs), the sowed area can be set to zero.

2.6

In practice it might occur that the machine's performance – application rate by

rows – is not consistent, there can be bigger differences between the rows.

If the operator is aware of this characteristic of the machine and wants to ignore

these bigger differences between, it can be done with the „ Confirm

performance" button . Therefore, the actual machine performance will be accepted as

consistent.

To cancel the performance confirm, press the Confirm performance button again.

Press the "Go to Machine Settings" to

access the machine settings screen.

ISOBUS application – User manual for XeedSystem v1.2.3

Main screen

Press the Back button to

return to the main screen.