Cisco PIX 501 Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco PIX 501. Cisco PIX 501 21 pagina's. Data sheet
Ook voor Cisco PIX 501: Snelstarthandleiding (20 pagina's), Gegevensblad (8 pagina's), Snelstarthandleiding (20 pagina's), Snelstarthandleiding (18 pagina's)

Installing the PIX 501

Computer or other

network device

Laptop computer

Follow these steps to connect the cables:

Place the chassis on a flat, stable surface. The chassis is not rack mountable.

Step 1

Connect Port 0, the outside Ethernet port, to the public network, that is, the Internet:

Step 2

a. Use the yellow Ethernet cable (72-1482-01) to connect the device to a switch or hub.

b. Use the orange Ethernet crossover cable (72-3515-01) to connect the device to a

cable/DSL/ISDN modem.

Connect your PC or other network devices with an Ethernet cable to one of the four switched

Step 3

inside ports (numbered 1 through 4).

Make sure that one of the PCs has TCP/IP installed and is configured to obtain an IP address

Note

automatically through DHCP. Installing TCP/IP and configuring DHCP allows the PC to

communicate with the PIX 501 and the Internet as well as run the PDM Startup Wizard.

Yellow

Ethernet

cable

DSL/Cable/ISDN

Printer

PIX 501

Orange

Ethernet

cable

modem

Power

adapter

Internet