Cisco RSP4+ Installatie- en configuratiehandleiding

Blader online of download pdf Installatie- en configuratiehandleiding voor {categorie_naam} Cisco RSP4+. Cisco RSP4+ 20 pagina's. Bootflash memory upgrade to 16mb

Pagina afdrukken

RSP4+ Bootflash Memory Upgrade to 16MB

Installation and Configuration Guide

Product Numbers:

Customer Order Number: DOC-7812288=

Introduction

An 8 MB bootflash image is supplied with the RSP4+, RSP4, RSP2, RSP1 and RSP7000 on the Cisco

7500 series routers. This image is insufficient to store newer, larger Cisco IOS Releases, such as

12.1(4.4)T2 and 12.1(5)T, and future releases on the RSP4+. Use the instructions in this document to

upgrade to a 16-MB bootflash. Alternatively, you can use Cisco IOS Release 12.0(13)S rsp-boot-mz

image or other image, which is less than 7.7 MB in size. Contact the Technical Assistance Center (see

Technical Assistance Center, page 19) for more information on this latter alternative.

Note: The RSP8 has 16 MB of Flash memory and does not encounter this problem.

Objectives

The purpose of this document is to explain how to perform the following procedures:

•

Remove the 8-MB SIMM and install a 16-MB SIMM

Upgrade the bootflash memory image

•

Contents

This document includes the following sections: