Cisco Secure Firewall Management Center 2700 Aan de slag handleiding - Pagina 11

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Secure Firewall Management Center 2700. Cisco Secure Firewall Management Center 2700 22 pagina's.

Pagina afdrukken

About the Secure Firewall Management Center 1700, 2700, and 4700

What to do next

• Connect to the management center web interface using the network information that you have configured.

• Review the weekly maintenance activities that the management center configures automatically as part

• Configure the management center for IPv6 addressing after completing the initial setup using the web

• (Optional) Configure the management center for SOL or LOM access as described in

Redirect the Console Output Using the Web Interface

You must be an Admin user to perform this procedure.

Before you begin

• Complete the initial setup process of the appliance.

• Disable Spanning Tree Protocol (STP) on any third-party switching equipment connected to the device's

Procedure

Step 1

Choose System ( ) > Configuration.

Step 2

Choose Console Configuration.

Step 3

Select a remote console access option:

• (Default) Choose VGA to use the appliance's VGA port.

• Choose Physical Serial Port to use the appliance's serial port.

Step 4

Click Save.

Redirect the Console Output Using the CLI

Before you begin

Complete the initial setup process of the management center.

of the initial configuration process. These activities are designed to keep your system up to date and your

data backed up. For more information, see

interface, if required. For more information, see

Configuration

Guide.

Management, on page

17.

management interface.

Cisco Secure Firewall Management Center 1700, 2700, and 4700 Getting Started Guide

Redirect the Console Output Using the Web Interface

Review Automatic Initial Configuration, on page 14

Cisco Secure Firewall Management Center Device

Set Up Light-Out