Cisco SNS 3755 Hardware installatiehandleiding - Pagina 25

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco SNS 3755. Cisco SNS 3755 42 pagina's.

Installing the Appliance

a) Align the rear ends of the inner rails that are attached to the appliance sides with the front ends of the empty slide

rails on the rack.

b) Push the inner rails into the slide rails on the rack until they stop at the internal stops.

c) Slide the inner-rail release clip toward the rear on both inner rails, and then continue pushing the appliance into the

rack until its front slam-latches engage with the rack posts.

Figure 9: Inner-Rail Release Clip

Step 5

(Optional) Secure the appliance in the rack more permanently by using the two screws that are provided with the slide

rails. Perform this step if you plan to move the rack with appliance installed.

With the appliance fully pushed into the slide rails, open a hinged slam latch lever on the front of the appliance and insert

a screw through the hole that is under the lever. The screw threads into the static part of the rail on the rack post and

prevents the appliance from being pulled out. Repeat for the opposite slam latch.

Step 6

(Optional) If applicable, do the following:

a) Attach the cable management arm. See

the Cable Management Arm (Optional), on page

b) Attach the locking bezel.

Inner-rail release clip

Inner rail attached to appliance and

inserted into outer slide rail

Installing the Cable Management Arm (Optional), on page 22

Cisco Secure Network Server 3700 Series Appliance Hardware Installation Guide

Outer slide rail attached to rack post

23.

Installing the Appliance in a Rack

Reversing