Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) Installatie- en configuratiehandleiding - Pagina 22
Blader online of download pdf Installatie- en configuratiehandleiding voor {categorie_naam} Cisco Versatile Interface Processor (VIP6-80) (VIP6-80). Cisco Versatile Interface Processor (VIP6-80) (VIP6-80) 40 pagina's. Versatile interface processor
Pagina afdrukken
Dual-Width Port Adapter
Dual-width port adapters occupy both port adapter slots on a VIP6-80. Before you can install a
dual-width port adapter, first remove the slot divider located between the two port adapter slots. (See
Figure
Figure 6
Use the following procedure to remove the slot divider from a VIP6-80:
Use a number 1 Phillips screwdriver to remove the screw located at the rear of each port adapter slot (see
Step 1
Figure
Remove the four slot divider screws that secure the slot divider to the VIP6-80 motherboard. (See
Step 2
Figure
Remove the slot divider and store it (and the screws) in a location where you can retrieve it for use later.
Step 3
If you need to reinstall the port adapter slot divider, place the slot divider in position on the VIP6-80 and
Note
secure it with the four Phillips screws.
See
Step 4
Versatile Interface Processor (VIP6-80) Installation and Configuration Guide
22
6.) Refer to
Table 4
for a list of dual-width port adapters.
Location of VIP6-80 Slot Divider and Screws
Screw holes for septum
7).
6.)
Figure 7
for the steps to install or remove a dual-width port adapter.
OL-5078-01