Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch Gegevensblad
Blader online of download pdf Gegevensblad voor {categorie_naam} Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch. Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch 9 pagina's. Cisco catalyst x6524: supplementary guide
Ook voor Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch: Witboek (18 pagina's)
Pagina afdrukken
DATA SHEET
CISCO CATALYST 6500 SERIES 10- AND 100-MBPS ETHERNET
FIBER-BASED INTERFACE MODULES
®
As the premier Cisco
modular multilayer switch, the Cisco Catalyst
the LAN access to the core, to the data center, and to the WAN edge.
PRODUCT OVERVIEW
The Cisco Catalyst 6500 Series provides the broadest selection of 10- and 100-Mbps media, densities, interoperability, and chassis deployment
options (refer to Table 1). The 100BASE-X, 100BASE-FX, and 10BASE-FL modules provide another alternative for the access and distribution
layer and metropolitan (metro) access deployments. The 100BASE-X module offers customers flexibility to mix and match different optics, and
maximize their investment protection by allowing pay-as-you-grow through support of modular, Small Form-Factor Pluggable (SFP) optics.
Cisco Catalyst 6500 10BASE-FL, 100BASE-FX, and 100BASE-X modules offer:
Fiber to the desktop
Choice of media and connector types—The 100BASE-X module supports multimode fiber (62.5- and 125-micron), and single-mode fiber using
modular SFPs, enabling mix-and-match, pay-as-you-grow optic deployments. Fixed MT-RJ for 100BASE-FX and 10BASE-FL modules supports
multimode fiber (62.5- and 125-micron) and single-mode fiber.
Port densities—Up to 48 ports per 100BASE-X module are supported, enabling up to 576 100BASE-X ports per 13-slot chassis; up to 24 ports
per 10BASE-FL module are supported, enabling up to 288 ports of 10BASE-FL per 13-slot chassis (configured with 12 interface modules).
Scalable and predictable system performance—The modules provide 32-Gbps switching and throughput of 15 Mpps.
Superior traffic management—The modules are available with large 256-MB buffers for 48 ports. Available with 4 transmit queues per port, with
1 strict priority queue for quality of service (QoS). Each port supports Weighted Random Early Detection (WRED) for congestion avoidance
within each queue, and Deficit Weighted Round Robin (DWRR) as well as Weighted Round Robin (WRR) for scheduling between queues to aid
in traffic prioritization. Up to 8 thresholds can be configured to manage differentiated levels of service.
Operational consistency—Configurations are available for Cisco Catalyst 6500 3-, 6-, 9-, and 13-slot chassis running Cisco IOS
Cisco Catalyst Operating System Software; they are interoperable with all other interfaces and services modules, and forward-compatible with all
Cisco Catalyst 6500 supervisor engines.
Maximum network uptime and resiliency—The modules support the Cisco Enhanced Per- VLAN Spanning Tree Plus (PVST+) protocol, IEEE
802.1w Rapid Spanning Tree Protocol (RSTP) and IEEE 802.1s Multiple Spanning Tree (MST) protocol, Per-VLAN Rapid Spanning Tree
(PVRST) protocol, Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), Gateway Load Balancing Protocol
(GLBP), Cisco EtherChannel
Extensive management tools—The modules support the CiscoWorks network management platform; Simple Network Management Protocol
(SNMP) Versions 1, 2, and 3; and four Remote Monitoring (RMON) groups (statistics, history, alarms, and events).
All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
®
, and IEEE 802.3ad link aggregation for fault-tolerant connectivity.
®
6500 Series delivers secure, converged services from
Page 1 of 9
®
Software and