Epson 3590 - Perfection Photo Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson 3590 - Perfection Photo. Epson 3590 - Perfection Photo 7 pagina's. Scanning application force quits on mac os 10.4
Ook voor Epson 3590 - Perfection Photo: Start Here (4 pagina's), Product ondersteunings bulletin (23 pagina's), Update (1 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (24 pagina's), Product ondersteunings bulletin (29 pagina's), Product ondersteunings bulletin (8 pagina's), Belangrijke veiligheidsinstructies (4 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (14 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (11 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (21 pagina's), Start Here (2 pagina's)

Epson Perfection 3590 Photo

Removing Dust From Film or Slides

Using the Dust Removal feature in EPSON Scan's Full Auto,

Home, or Professional Mode, you can virtually "clean" the dust

marks from film or slides as you scan them. For detailed steps,

see the on-screen User's Guide.

Full Auto Mode

Home and Professional Mode

6 - Epson Perfection 3590 Photo

Reading the Scanner Light

The scanner's ] Start light indicates the scanner status.

]

Start light

Scanner status

Flashing green

Warming up or scanning.

Green

Ready to scan.

Flashing red

Make sure the transportation lock is unlocked.

Try restarting your computer and unplugging the

scanner. Wait 10 seconds, then plug the scanner

back in.

Film may be jammed in the auto film loader.

Disconnect the scanner from the computer, wait

10 seconds, and connect it to the computer again

to see if the film ejects on its own. If film is still

jammed, see your on-screen User's Guide.

If the red light is still flashing, contact Epson.

Off

Make sure your scanner is connected to your

computer and plugged into a power source.

6/05