Cisco 2500 Series Configuratiehandleiding - Pagina 31

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 2500 Series. Cisco 2500 Series 50 pagina's. Wireless controller
Ook voor Cisco 2500 Series: Handleiding installeren (12 pagina's), Configuratiehandleiding (19 pagina's), Uitrolhandleiding (23 pagina's), Aan de slag handleiding (47 pagina's)

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

In the navigation pane, under Access Points click Radios, then select 802.11a /n. All the

APs that are connected should be listed, showing their Operational Status as UP.

Select Configure from the drop-down list for the access point you wish to change. Set

the parameters for that AP:

Settings: Power and channel settings

Global settings for RF Channel Assignment and Tx Power Level Assignment

were not tested. For Custom Tx Power and RF Channel settings please consult

your facility's RF site survey — optimized for wireless voice traffic — to determine

correct power and channel settings for each AP using non-overlapping channels.

Configure any other settings that might be relevant to your deployment as needed.

b Click the Apply button to save all changes.

721-1001-000-AH.docx

December 2016