Cisco 2500 Series Aan de slag handleiding - Pagina 15

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco 2500 Series. Cisco 2500 Series 47 pagina's. Wireless controller
Ook voor Cisco 2500 Series: Handleiding installeren (12 pagina's), Configuratiehandleiding (19 pagina's), Uitrolhandleiding (23 pagina's), Configuratiehandleiding (50 pagina's)

Figure 7

Use a 0.107-inch (2.7mm) or #32 drill bit to drill a 3/4 inch (19mm) hole for the two mounting screws.

Step 2

Insert two screws into the screw holes and tighten until the top of the screws are 1/8 inch from the wall

Step 3

(leaving enough room for the back panel to slide onto the screws firmly).

Place the controller onto the mounting screws and slide it down until it lock into place, as shown in

Step 4

Figure

The front panel of the controller should be facing down.

Note

Mounting Screw Holes on the Back of the Controller

5.5

FRONT PANEL

Cisco 2500 Series Wireless Controller Getting Started Guide

Installing the Controller