Cisco 2600 Series Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco 2600 Series. Cisco 2600 Series 22 pagina's. Configuring adsl wic to support pppoe clients
Ook voor Cisco 2600 Series: Installatiehandleiding (12 pagina's), Release-opmerkingen (32 pagina's), Configuratie (15 pagina's), Toepassingsnotitie (41 pagina's), Gegevensblad (6 pagina's), Bijlage (15 pagina's), Overzicht (13 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (5 pagina's)

Pagina afdrukken
Cisco 2600 Series Installatiehandleiding
Setting Up the Chassis
Figure 3-15 Center-Mount Bracket Installation—Front Panel Forward (19-Inch Rack)
Figure 3-16 Center-Mount Bracket Installation—Rear Panel Forward (19-Inch Rack)
Wide bracket
(marked RIGHT)
Installing the Router in a Rack
After the brackets are secured to the chassis, you can mount the chassis in a rack. Use the illustrations
in the previous section as a guide to attaching the brackets to the rack.
Note
The screws for attaching the brackets to the rack are not included with the router.
Always use two screws to attach each bracket to the rack.
Caution

Mounting the Chassis on the Wall

Cisco 2600 series routers with a chassis height of 1RU can be attached to a wall. Mounting a 2RU chassis
to a wall is not recommended and brackets are not provided for mounting to a wall.
Cisco 2600 Series Routers Hardware Installation Guide
3-10
Narrow bracket
(marked LEFT)
NM -HD
V
BA NK 4
BA NK 3
BA NK 2
BA NK 1
BA NK 0
V0
SEE MAN
UAL BEFO
DSU
RE INST
EN
ALLA TION
56K
SEE MAN
SE RI ES
SE RI ES
Wide bracket
(marked RIGHT)
UAL BEFO
DSU
RE INST
ALLA TION
56K
SEE MAN
UAL BEFO
RE INST
ALLA TION
Chapter 3
Installing the Router
Narrow bracket
(marked LEFT)
OL-2171-02