Cisco 3500 Series Installatiehandleiding - Pagina 33

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco 3500 Series. Cisco 3500 Series 36 pagina's.

Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware Appliances

Upgrade the BIOS and Cisco IMC Firmware

The following procedure describes how to upgrade the BIOS and Cisco IMC firmware on Cisco SNS-3515

and SNS-3595 appliances.

To check the version of BIOS and Cisco IMC that is currently running on your appliance:

1. Launch CIMC.

2. Click BIOS.

The running version is listed under BIOS properties.

Cisco ISE runs on Cisco Secure Network Server 3515 and Cisco Secure Network Server 3595 hardware

appliances with Cisco Secure Access Control System (Cisco Secure ACS) PIDs. Before you install Cisco ISE

on an SNS-3500 server that was previously used for Cisco Secure ACS, you must upgrade the BIOS and

Cisco IMC firmware to a version that supports the Cisco ISE secure boot capability.

Note

After you upgrade the BIOS, secure boot is enabled, and ACS will no longer boot on this appliance. Do not

perform this BIOS upgrade procedure until you are ready to convert the appliance from ACS to ISE.

Before you begin

We recommend that you use the latest BIOS and matching Cisco IMC firmware. You can download the

updated Cisco IMC and BIOS files for the Cisco SNS-3500 series appliance from

When you upgrade the BIOS firmware, you must also upgrade the Cisco IMC firmware to the same version.

Otherwise, the server will not boot.

You must use the versions of Cisco IMC firmware from the ISE downloads, which are qualified versions for

use with the SNS appliances. Versions of Cisco IMC for UCS are not compatible. Newer versions of Cisco

IMC are developed for SNS appliances after they are developed for UCS.

Note

In the download directory, check for any release notes or upgrade instructions.

The following steps describe how to upgrade the BIOS and Cisco IMC. This procedure may change when

newer firmware releases that are posted on Cisco.com.

Step 1

Update the Cisco IMC firmware:

a) In the Cisco IMC interface, choose Admin > Firmware Management.

b) From the Actions pane, select the Check Install Cisco IMC Firmware through Browser Client option.

c) In the Install Cisco IMC Firmware window, click Browse and select the firmware image to install, and then click

Install Firmware to begin download and installation.

After the installation is fully completed, the status changes to Completed Successfully. The image replaces the

nonactive image.

Step 2

Update the BIOS firmware:

a) In the Cisco IMC interface, choose Admin > Firmware Management.

Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide

Upgrade the BIOS and Cisco IMC Firmware

Cisco Software

Download.