Cisco 6400 Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco 6400. Cisco 6400 34 pagina's. Video surveillance 6400 ip camera
Ook voor Cisco 6400: Gegevensblad (8 pagina's)

Pagina afdrukken

Camera Installation

This chapter provides information and instructions for installing the Cisco Video Surveillance

6400 IP Camera, and includes the following topics:

•

Installation Guidelines

This section describes how to install the IP camera. Before installing, review these guidelines:

•

OL-28494-01

Installation Guidelines, page 2-1

Warnings Before Installation, page 2-2

Installing the IP Camera, page 2-3

Connecting External Power and I/O Cables, page 2-5

Connecting a Waterproof Ethernet Cable, page 2-8

Installing the Sun Shield, page 2-9

The IP camera requires a network cable and a connection to a standard 10/100BaseT router or

switch. To power the IP camera with Power over Ethernet (PoE), a switch must be 802.3af

compliant.

If you are using the IP camera on a network connection that does not provide PoE, you must use a

Cisco 12 VDC power adapter (Cisco part number CIVS-PWRPAC-12V) or a third-party 24 VAC

power adapter.

If you are using an input device, output device, or pan/tilt control device, you must configure

additional settings after installing and performing the initial set up of the IP camera before the

external device can fully operate. For detailed information about these settings, see the Cisco Video

Surveillance 6000 Series IP Camera Configuration Guide.

If you do not connect an external device (input, output, or pan/tilt control) when you perform the

following installation procedure, you can install any of these devices later.

C H A P T E R

Cisco Video Surveillance 6400 IP Camera Installation Guide

2-1