Cisco 7513 Series Snelstarthandleiding - Pagina 14

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 7513 Series. Cisco 7513 Series 44 pagina's. Chassis replacement
Ook voor Cisco 7513 Series: Handleiding vervangende instructies (26 pagina's), Gegevensblad (11 pagina's), Handmatig (30 pagina's), onderhouden (20 pagina's), Handleiding vervangende instructies (19 pagina's), Handleiding vervangende instructies (22 pagina's)

Install the Hardware

Connect AC-Input Power Supply

Warning

power supply should be off.

Step 1

For AC-input power supplies, push the

cable retention clip away from the power

receptacle and plug in the power cable.

Step 2

Push the cable retention clip until it snaps

into place around the cable connector.

Step 3

Reconnect the power cable at the power

source, remove the tape on the breaker

switch. Do not turn on the breaker or

power to the power supply.

FAN

OUTPUT

FAIL

The system power switch on the

Cable-retention clip

FAN

OUTPUT

FAIL

Captive screws

Note

A power supply blank must remain in any

empty power supply bay.

Step 4

Repeat Step 1 through Step 3 for the

second power supply, if present.

Note

Do not mix AC-input and DC-input power

supplies in the same chassis.

POW ER