Cisco 7513 Series Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 7513 Series. Cisco 7513 Series 30 pagina's. Chassis replacement
Ook voor Cisco 7513 Series: Snelstarthandleiding (44 pagina's), Handleiding vervangende instructies (26 pagina's), Gegevensblad (11 pagina's), onderhouden (20 pagina's), Handleiding vervangende instructies (19 pagina's), Handleiding vervangende instructies (22 pagina's)

What is the Cisco 7576?

Figure 1

Cisco 7513—Interface Processor End

Blower module

Cable-management

bracket

Card cage and

processor modules

Air intake vent

Power supplies

POW ER

Chassis grounding

POW ER

receptacle (2)

What is the Cisco 7576?

The Cisco 7576 is an independent dual router system that supports multiprotocol, multimedia

routing and bridging with a wide variety of protocols and any combination of available electrical

interfaces and media. The Cisco 7576 consists of two independent routers on a single split backplane

within the chassis footprint of a Cisco 7513 router.

Network interfaces reside on interface processors that provide a direct connection between two

independent dual CyBuses in the Cisco 7576 and your external networks. The backplane of the

Cisco 7576 has 13 slots and provides two routers on a single split backplane, designated router A

and router B. Router A uses interface processor slots 0 through 5 and a Route Switch Processor

(RSP4) in slot 6. Router B uses interface processor slots 8 through 12 and a Route Switch Processor

(RSP4) in slot 7.

There are bays for up to two AC-input or DC-input power supplies. The chassis will operate with

one power supply. While a second power supply is not required, it allows load sharing and increased

system availability.

Cisco 7513 and Cisco 7576 Chassis Replacement and Upgrade Instructions