Cisco Aironet 1500 Series Aan de slag handleiding - Pagina 28

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Aironet 1500 Series. Cisco Aironet 1500 Series 31 pagina's. Lightweight outdoor mesh access points
Ook voor Cisco Aironet 1500 Series: Gegevensblad (8 pagina's)

Cisco Aironet 1500 Series Aan de slag handleiding

Installing the System

Use the installation procedures described in
Management Center Initial Setup, page
750, 1500, 2000, 3500, and 4000 Hardware Installation Guide.
When preconfiguring the system, keep the following in mind:
Add licenses for managed devices during the initial setup. If you do not add licenses at that time, any devices
you register during initial setup are added to the Management Center as unlicensed; you must license each of
them individually after the initial setup process is over. See
Preparing the Appliance for Shipment
To prepare the appliance for shipment, you must safely power down and repackage the appliance:
To safely power down the appliance, see
To ensure that your appliance is safely prepared for shipping, see
Deleting a License from a Management Center
Use the following procedure if you need to delete a license for any reason. Keep in mind that, because Cisco
generates licenses based on each Management Center's unique license key, you cannot delete a license from one
Management Center and reuse it on a different Management Center. For more information, see See Licensing the
Firepower System in the Firepower Management Center Configuration Guide.
To delete a license:
1.
Select
Systems > Licenses
2.
Next to the license you want to delete, click the delete icon (
Deleting a license removes the licensed capability from all devices using that license. For example, if your
Protection license is valid and enabled for 100 managed devices, deleting the license removes protection
capabilities from all 100 devices.
3.
Confirm that you want to delete the license.
The license is deleted.
Powering Down the Appliance
Use the following procedures to power down the appliance safely before disconnecting the power supply.
To power down a Management Center:
1.
On the Management Center, enter the following at the command line:
sudo shutdown -h now
The Management Center shuts down safely.
Shipping Considerations
To prepare the appliance for shipment to the target location, you must safely power down and repackage the
appliance. Keep in mind the following considerations:
Cisco Firepower Management Center Getting Started Guide
Installing the Firepower Management Center, page 3
4. For additional information, see the Cisco Firepower Management Center
Powering Down the Appliance, page
.
Preconfiguring Firepower Management Centers
License Settings, page
8.
28.
Shipping Considerations, page
).
and
28.
28