Epson ActionLaser 1500 Installatiehandleiding - Pagina 18

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson ActionLaser 1500. Epson ActionLaser 1500 18 pagina's. Imaging cartridge replacement procedure
Ook voor Epson ActionLaser 1500: Papier en papierlevering (11 pagina's), Installatiehandleiding (7 pagina's), Product ondersteunings bulletin (8 pagina's), Productspecificatie (1 pagina's)

Feed

paper

When the printer stops printing and the FE E D JAY or

PAPER JAM message appears, follow these steps:

1. Open the paper cover. Carefully remove all the paper in the

paper bin along with any sheets that have fed part way into

the printer. If the paper is caught in the paper ejection area,

gently pull it out.

2. If the paper tears when you remove it or if the paper is

caught beyond the feed slot, make sure you remove any

pieces remaining in the printer. To do this, open the printer

cover.

Remove the imaging cartridge. Then remove any paper from

the paper feed path, reinsert the imaging cartridge, and

close the printer cover.

Note:

Because the toner on the paper inside the printer may not have

been fixed on the page, toner may come off on your hands when

you remove the paper. If you spill toner on your clothing, rinse it

off with cold water. Using hot water may leave a permanent

stain. When you resume printing, the first few pages may be

slightly smeared with excess toner.

3. Tap the edges of the paper stack on a flat surface and

carefully reload it into the paper bin. (Do not reload curled

or wrinkled sheets.) Close the paper cover.

4. The jammed page is automatically reprinted. If you did not

open the printer cover to clear the jam, press

jam

WARNING:

If you open the printer cover you expose the fuser, which is

marked by a

CAUTION HOT SURFACE

not to touch the fuser.

label. Be careful

CONTINUE.

Maintenance 15