Cisco expressway ce1100 Installatiehandleiding - Pagina 5
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco expressway ce1100. Cisco expressway ce1100 20 pagina's.
Pagina afdrukken
Cisco Expressway CE1100 Appliance Installation Guide
Introduction
Introduction
About This Document
This document describes how to install a Cisco Expressway appliance into your video network. It contains information
on:
Preparing the installation.
■
Installing the hardware.
■
Performing the initial configuration.
■
Troubleshooting the installation.
■
About the Cisco Expressway Appliance
The Cisco Expressway appliance described in this document is a CE1100, which is based on a UCS C220 M4L. For
more detailed information on installing this appliance, see the
The appliance ships with the Cisco Expressway software pre-installed, and you can upgrade the software if
necessary.
The appliance supports Cisco Expressway version X8.6.1 or later.
Note:
If you choose to use the copper SFPs, the unit cannot support more than 150 traversal calls. This is the case
even if the option key for extra traversal calls has been installed.
Table 2 Components for this Appliance
Item
Chassis
Processor
RAM
Hard Disk
Onboard SAS Controller
NIC
PSU
TPM
SD Card
Miscellaneous
Cisco UCS C220 Server Installation and Service
Part
UCS-C220-M4L
UCS-CPU-E52637D (3.5 GHz/ 4 core - hyper threaded)
UCS-MR-1X162RU-A (16GB)
UCS-HD2T7KL12G
UCSC-MRAID12G (Cisco 12G SAS Modular Raid Controller, 1 GB
cache and SuperCap)
N2XX-AIPCI01 (Intel X520 Dual Port 10Gb SFP+ Adapter)
EXP-10GSFP-SR (10Gb SR Fiber SFP)
EXP-1GSFP-T (1Gb Copper SFP)
UCSC-PSU1-770W & power cable
UCSX-TPM2-001 (Trusted Platform Module)
UCS-SD-32G-S (32GB SD Card for UCS servers)
UCSC-RAILF-M4 (Rail kit)
UCSC-HS-C220M4 (Heat sink)
UCSC-MLOM-BLK (MLOM blank panel)
UCSC-BBLKD-L (3.5-inch HDD blank panel)
5
Guide.
Quantity
1
2
2
2
1
1
2
2
2
1
1
1
2
1
2