Epson CaptureOne TM-S1000 Handleiding productinformatie - Pagina 6

Blader online of download pdf Handleiding productinformatie voor {categorie_naam} Epson CaptureOne TM-S1000. Epson CaptureOne TM-S1000 6 pagina's. Epson tm-s1000 cheque and coupon scanner
Ook voor Epson CaptureOne TM-S1000: Producthandleiding (27 pagina's), Gebruikershandleiding (41 pagina's), Installatiehandleiding (8 pagina's)

Epson CaptureOne TM-S1000 Handleiding productinformatie
Error and Information Codes
Status messages
DOCUMENT LED (Green)
Waiting for paper insertion
160 ms intervals
ERROR LED (Orange)
Waiting for paper removal
160 ms intervals
Recoverable errors
ERROR LED (Orange)
Mechanism position error
Approx. 320 ms
Paper jam error
320 ms intervals
Document read error
320 ms intervals

Unrecoverable errors

ERROR LED (Orange)
CPU execution error
Approx. 320 ms
Read/write or
Memory overwrite error
Approx. 5120 ms
Cause and Solution
The scanner is waiting for a check to be
inserted.
Insert a sheet for scanning.
Cause and Solution
This occurs when paper is sensed by
the paper length, middle, franking, or
ejection sensor during initialization of
the scanner.
Remove paper from pocket.
Cause and Solution
This occurs when the SF, franking, or
pocket switch board sensor detect an
error during initialization of the scanner.
The scanner can recover from this error
if an instruction is sent from the driver or
if the scanner is turned off, the error is
cleared, and the scanner is turned
back on.
One of 5 things has happened:
1. Paper has been detected during
initialization.
2. The paper length, middle, franking,
or ejection sensor detected a
paper-feed error.
3. The SF failed to feed the sheet.
4. The check was too short or too long.
5. The cover was open during check
feeding.
Remove the jammed sheet, be sure the
cover is closed, and send an instruction
from the driver or turn the scanner off
and back on again.
For this error to occur, the user must
select that this error stop reading under
any of the following circumstances:
1. Double-feeding was detected.
2. Incorrect check paper insertion was
detected.
3. The scanner detected external
noise.
After the cause of the error is fixed, the
scanner can recover from the error if it
receives an instruction from the driver, if
the scanner is turned off and back on,
or if the franker cover is opened and
the check is removed.
Cause and Required Action
The CPU is trying to execute an
order to an invalid address.
Turn off power as soon as possible.
A read/write check did not end
normally or an error occured
during a memory overwrite.
Turn off power as soon as possible.
Epson CaptureOne Single Feed
ERROR LED (Orange)
High voltage error
Low voltage error
Communication device error
Drive circuit error
Sensors
(A) SF sensor
(B) Paper length sensor
(C) Middle sensor
(D) Franking sensor
(E) Eject sensor
(F) Main pocket nearly full sensor
(G) Sub pocket nearly full sensor
(H) Scanner cover open sensor

Related Documentation

Epson TM-S1000 Single Feed Specification
Epson TM-S1000 Single Feed Service Manual
Epson TM-S1000 Single Feed Parts Price List
Epson TM-S1000 Single Feed Technical Reference Guide
Epson Franking Cartridge EFC-01 Specification
7/09
Cause and Required Action
Power supply voltage is too high.
Turn off power as soon as possible.
Power supply voltage is too low.
Turn off power as soon as possible.
An error has occured with a
communication device.
Turn off power as soon as possible.
An image scanner error has
occurred.
Turn off power as soon as possible.
Paper feed direction
Paper feed direction
(I) Franker cover open sensor
(J) Franking cartridge sensor
(K) Franking cartridge position sensor
(L) Pocket switching board sensor
(M) Hopper position sensor
(N) Image scanner unit
(O) MICR unit
(P) Franking unit
Epson CaptureOne Single Feed - 5