Cisco Firepower 2130 Installatie en onderhoud - Pagina 2
Blader online of download pdf Installatie en onderhoud voor {categorie_naam} Cisco Firepower 2130. Cisco Firepower 2130 26 pagina's. Rack-mount and ground the chassis
Ook voor Cisco Firepower 2130: Handmatig (12 pagina's), Uitrolhandleiding (8 pagina's), Aan de slag (42 pagina's)
Pagina afdrukken
Install, Remove, and Replace the Network Module
Warning
Warning
Warning
Warning
Warning
Step 1
To install a new network module for the first time into an empty slot, do the following:
a) Power down the chassis by moving the power switch to the OFF position.
See
Rear Panel
b) Follow Steps 4 through 7 to install the new network module.
c) Power on the chassis by moving the power switch to the ON position.
Step 2
To remove and replace an existing network module, do the following:
a) Save your configuration.
b) Power down the chassis by moving the power switch to the OFF position.
See
Rear Panel
c) Continue with Step 3.
Step 3
To remove a network module, loosen the captive screw on the lower left side of the network module and pull out the
handle that is connected to the screw. This mechanically ejects the network module from the slot.
Installation, Maintenance, and Upgrade
2
Statement 1030 Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1089 Instructed and Skilled Person Definitions
An instructed person is someone who has been instructed and trained by a skilled person and takes the
necessary precautions when working with equipment.
A skilled person or qualified personnel is someone who has training or experience in the equipment
technology and understands potential hazards when working with equipment.
Statement 1090 Installation by Skilled Person
Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089
for the definition of a skilled person.
Statement 1091 Installation by an Instructed Person
Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.
See statement 1089 for the definition of an instructed or skilled person.
for more information about the power switch.
for more information about the power switch.
Installation, Maintenance, and Upgrade