Epson CX5400 - Stylus Color Inkjet Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Epson CX5400 - Stylus Color Inkjet. Epson CX5400 - Stylus Color Inkjet 11 pagina's. Product support bulletin(s)
Ook voor Epson CX5400 - Stylus Color Inkjet: Snelle referentiehandleiding (40 pagina's), Productinformatieblad (4 pagina's), Start hier Handleiding (8 pagina's), Software-installatie (8 pagina's), Start hier Handleiding (8 pagina's), Update (1 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (17 pagina's), Product ondersteunings bulletin (18 pagina's)

Epson CX5400 - Stylus Color Inkjet Handmatig
EPSON Stylus CX5400

Loading Paper

Single Sheets

1. Open the output tray and its extensions.
2. Flip the feeder guard forward.
3. Insert your paper against the right edge of the sheet feeder.
Slide the left edge
guide against the
paper
4. Slide the left edge guide against the paper (but not too
tightly).
5. Lower the feeder guard back over the paper.
Also be sure to:
❏ Load the printable side face-up. It's often whiter or brighter
than the other side.
❏ Load letterhead or preprinted paper top edge first.
❏ Don't load paper above the arrow on the left edge guide.
❏ Load up to approximately 100 sheets of plain paper at a
time.
EPSON Stylus CX5400
4 -
Open output tray
and extension
Flip feeder guard forward
Insert paper against
the right edge
Envelopes
1. Load up to 10 envelopes at a time, flap edge left, and
printable side up, against the right edge of the sheet feeder.
2. Slide the left edge guide against the envelopes (but not too
tightly).
3. Raise the scanner section as shown and set the paper
thickness lever to the ^ position (remember to set it back to
the m position when you're done).
Note:
For best results, press each envelope flat before loading, or load one
envelope at a time.
4. Lower the scanner section until it clicks into place.
5. Select the following settings:
Plain paper
(Macintosh
) setting
®
❏ The correct envelope size as the Size (Windows) or
Paper Size (Macintosh) setting
Landscape
8/03
Set the thickness
lever to the ^
position
as the Type (Windows
) or Media Type
®
as the Orientation setting