Epson CX7800 - Stylus Color Inkjet Handmatig - Pagina 16

Blader online of download pdf Handmatig voor {categorie_naam} Epson CX7800 - Stylus Color Inkjet. Epson CX7800 - Stylus Color Inkjet 19 pagina's. Epson scan icm updater v1.20 (psb.2008.07.001)
Ook voor Epson CX7800 - Stylus Color Inkjet: Specificaties (2 pagina's), Technisch overzicht (6 pagina's), Snelstarthandleiding (12 pagina's), Start hier Handleiding (8 pagina's), Update (1 pagina's)

Epson CX7800 - Stylus Color Inkjet Handmatig
Epson Stylus CX7800
5. Before you open the new ink cartridge package, shake it
four or five times. Then remove it from the package.
Caution:
Do not remove or tear the label on the cartridge; otherwise, ink
will leak.
Do not touch the green chip on the front of the cartridge. This can
damage the ink cartridge.
6. Place the new ink cartridge into the cartridge holder and
push it down until it clicks into place.
7. Replace any other cartridges that need to be replaced.
8. Close the ink cartridge cover and press it until it clicks into
place.
16
Epson Stylus CX7800
-
9. Close the scanner.
10. Press the x
Start
charging ink and the P
about one minute. When it's finished, the P
flashing and remains on.
Caution:
Never turn off the Epson Stylus CX7800 while the P On light is
flashing or you'll waste ink.
11. Press the
Setup/Utilities
mode.

Aligning the Print Head

If your printouts look grainy or blurry, or you see light or dark
horizontal banding, you may need to align the print head.
Note:
Banding may also occur if your cartridges are low on ink or you need
to clean the print head.
1. Turn on the Epson Stylus CX7800.
2. Load several sheets of paper.
3. Windows: Right-click the
(in the lower right corner of your screen). Select
.
Alignment
Macintosh OS X: Open the
EPSON Printer Utility
in the printer list, click
.
Alignment
8/05
button. The Epson Stylus CX7800 begins
light starts flashing. This takes
On
button to return to the previous
printer icon on your taskbar
folder and select
Applications
. Select your Epson Stylus CX7800
, and select
OK
Print Head
light stops
On
Print Head