Cisco Nexus 7000 Series Handleiding voor installatie-instructies - Pagina 19

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 39 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Referentie (34 pagina's), Installatiehandleiding (18 pagina's), configureren (8 pagina's), Configuratiehandleiding (28 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Figure 11

Positioning and Fastening a Spanner Bar

To ensure adequate space between the brackets and a proper chassis ﬁt, push the brackets

Caution

as far apart as possible before tightening the screws that secure them and the spanner bars.

Step 5

When both spanner bars are in place, use a number 2 Phillips screwdriver to tighten the six

pan-head screws that secure the brackets to the rack-mounting posts, and the two anchor

screws that secure the spanner bars. When tightening the pan-head screws on a bracket,

push the bracket outward, away from the center of the rack, to ensure that the brackets

remain at least 17.5 inches apart (otherwise the chassis will not ﬁt between the brackets).

This completes the bracket installation. To install the ears on the chassis, proceed to the next section.

Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions

Installation